I recently bled mine.

And took a good 40 mins for the bottom hoses to get hot.

Have you talked the thermostat out and tested it to check its working?

Does anybody know if there is anywhere you can buy a digital pdf version of the service manual?

Thanks!

Yeah that’s the diagram I posted. And that’s what I took from it. The replacement hose I got seems a bit too long though for that orientation.

And lots of people seem to have it the other way round! I’m not entirely sure if it even matters which way they go. . .

No. It’s this one.

I am still none the wiser on which way round they should be!

Drivers side/ longer hose to the top of heater matrix or other way round

I have seen some pictures showing the other way around like below

Or am I confused?

But I’m pretty sure those are the coolant hoses in the diagram for the heater matrix.

Showing the left one going to the top. And right one going to the bottom of the heater matrix. Is that the correct way round?

I think you might be a bit confused?

That diagram shows the flow and return for the front heater matrix. This hoses are the coolant hoses for the front heater matrix.

I currently fitted them the sane way round as the diagram.

But a few other pictures I have seen people have them the other way around.

Sorry I meant drivers side metal pipe.

This is the diagram.

Can anybody help with which way round the front heater hoses go? Looking at the diagrams it seems to show the bottom of the front heater matrix goes to the passenger side t piece and the top of the heater matrix has the longer hose going to the drivers side metal pipe. But I have seen a few pictures...