I reversed my middle bench when I bought the Freda - followed the instructions on this forum which meant swopping over the short tracks also. Now my son and family will use Freda for a trip to France and we are considering returning to a forward facing bench for that trip. Can I swithc back without moving the tracks again and if so will the bench and front seats fit together to provide beds? Anyone done this?
Ron
reversing a reversed bench
Moderators: Doone, westonwarrior
Re: reversing a reversed bench
I seem to recall on the fact sheets, that if you don't change the runners as well the seat, it will not slide correctly if at all
There is more stupidity than hydrogen in the universe, and it has a longer shelf life.
F Zappa
F Zappa
- missfixit70
- Supreme Being
- Posts: 12431
- Joined: Fri Jun 01, 2007 3:53 pm
- Location: weymouth
Re: reversing a reversed bench
You're right lizard, this might be of some use Ronhud - madmile's reversible runners link
You can't polish a turd - but you can roll it in glitter.
Re: reversing a reversed bench
Thanks for that link Miss Fixit. I nead to read and understand and then see if I can get a pair of 'donor runners' - it does seem to be a really good solution.
Ron
Ron
Re: reversing a reversed bench
Ian, I haven't read the factsheet, but if madmiles info isn't on it (see missfixit link), perhaps it could be added?
Allan's closed. in Plymouth we recommend PGS (Plymouth Garage Services) or Mayflower Auto Services