Our sliding door lock mechanism seems to operate quite a few times after closing, whether the van is moving or not. The lock works fine either operated at the door or by central locking.
If the lock mechanism sounds as if it's operating while driving, I've operated the drivers door lock button and that seems to stop the problem.
First thought is dirty contacts and I'm going to get some switch cleaner.
Any other ideas?
Sliding door lock electrics
Moderators: Doone, westonwarrior
Sliding door lock electrics
Freda now gone, :-/ But nice wee Burstner obtained
http://www.gordonbickerton.co.uk
http://www.gordonbickerton.co.uk
Re: Sliding door lock electrics
Aha,
First thing is clean the 5 contacts on the door and door post, the sprung ones are for the door close mech and the two fixed ones are the door lock. They are powered so use a light sandpaper or kitchen cleaner sponge, don't use wire wool!
From another post, by g8dhe !
http://igmaynard.co.uk/bongo/forum/view ... +mechanism
Please excuse faffing, just learned how to link to other topics
So much to learn, so little time.
First thing is clean the 5 contacts on the door and door post, the sprung ones are for the door close mech and the two fixed ones are the door lock. They are powered so use a light sandpaper or kitchen cleaner sponge, don't use wire wool!
From another post, by g8dhe !
http://igmaynard.co.uk/bongo/forum/view ... +mechanism
Please excuse faffing, just learned how to link to other topics
So much to learn, so little time.
Freda now gone, :-/ But nice wee Burstner obtained
http://www.gordonbickerton.co.uk
http://www.gordonbickerton.co.uk