Propex 2000 fitting with 8 seater

Questions & answers about kitchen units, stoves, fridges, heaters, water tanks, seats, mattresses etc etc.

Moderator: Doone

Post Reply
blueskink
Junior Bongonaut
Posts: 16
Joined: Sun Mar 08, 2015 8:31 pm

Propex 2000 fitting with 8 seater

Post by blueskink » Sun Mar 08, 2015 10:57 pm

Hi All

Bought a bongo after searching the net for a VW alternative. I like it a lot, nice to drive, smooth, love the auto box despite thinking i wouldn't. I sold my caravan because we never used the shower, sink, loo, etc we always founds that the site facilities were superior. For the same reason I have kept the standard 8 seats in the Bongo and have no plans to fit the usual camper bits. We have an excellent electric coolbox from Halfords, that was way bigger than the caravan fridge and we have a small suitcase gas burner from Boyes for a cups of tea. We generally eat out when on holidays.

Anyway, I have just bought in a sale a Propex 2000 to heat the Bongo when we are parked, or actual camping.
I thought that the Propex could be placed in a box under the rear seats. There is a space to vent to the left of the full size spare tyre (when looking from the rear). The heater is very low and it looks to be a good place to put it.
My question is would you agree?
I don't really want to take the rails out or the seats, theres no point.
what do you think?

Cheers
User avatar
Simon Jones
Supreme Being
Posts: 9341
Joined: Mon Aug 29, 2005 3:34 pm
Location: Salisbury (ish), Wiltshire

Re: Propex 2000 fitting with 8 seater

Post by Simon Jones » Sun Mar 08, 2015 11:08 pm

Welcome to forum :). I think you're right about the rear seat being a good location but I'm wondering where you are going to be able to keep the cylinder?
winchman
Supreme Being
Posts: 1984
Joined: Sat Jan 07, 2012 1:34 pm
Location: St.Helens Merseyside

Re: Propex 2000 fitting with 8 seater

Post by winchman » Tue Mar 10, 2015 8:16 am

I would put it in the boot.
Just build one of these and put the propex in the cupboard.
Image
User avatar
stuc
Supreme Being
Posts: 1989
Joined: Wed Dec 01, 2010 12:25 am
Location: Ryton,Tyne+Wear
Contact:

Re: Propex 2000 fitting with 8 seater

Post by stuc » Wed Mar 11, 2015 12:25 am

That's better Winchman, I was having withdrawal symptoms as I'd never seen that picture for ages. I still like it! :lol:
Do what you like.Like what you do.
blueskink
Junior Bongonaut
Posts: 16
Joined: Sun Mar 08, 2015 8:31 pm

Re: Propex 2000 fitting with 8 seater

Post by blueskink » Sun Mar 15, 2015 6:51 pm

Thanks for the reply Winchman, I agree, nice picture.

Have been delayed in answering as my ipad refuses to let me log on. I've had to bring back to life my ancient dead battery frankenlaptop.

I will be building a cupboard, when it warms up a bit.

Did you remove the carpet or just cut through it? I have just bought quite a chunky 40mm hole saw. I think I might be taking all of the old/stained carpet up and replacing it with those interlocking workshop floor tiles. I did this with my caravan and it worked out ok, although I won't be using the same wood effect tiles, just plain gray ones, or maybe the blue ones, though I would like to see some blue ones first.

I'm not into the stripy lino flooring. Unless there is a more classy option. (no offense to stripy interiors)
Gasy
Supreme Being
Posts: 2123
Joined: Thu Apr 11, 2013 5:49 pm
Location: Peterborough

Re: Propex 2000 fitting with 8 seater

Post by Gasy » Sun Mar 15, 2015 7:39 pm

With your iPad go into settings , Safari and clear Internet history / cookies etc
And then log onto here again thought the one web address which say Igmaynard
Seems to work for me after that

I've used them interlocking foam floor tiles in my caravan and landrovers work great don't they and comfy / warm to feet in morning

Been missing that pic winchman ( might put my wheel pic up again in a min ) :D never catch you up tho
Gas safe heating engineer / plumber if you need any advice just shout.
winchman
Supreme Being
Posts: 1984
Joined: Sat Jan 07, 2012 1:34 pm
Location: St.Helens Merseyside

Re: Propex 2000 fitting with 8 seater

Post by winchman » Sun Mar 15, 2015 8:19 pm

I just cut the very end of the rear carpet out, screwed two batons to the floor and fastened the kitchen to them
winchman
Supreme Being
Posts: 1984
Joined: Sat Jan 07, 2012 1:34 pm
Location: St.Helens Merseyside

Re: Propex 2000 fitting with 8 seater

Post by winchman » Sun Mar 15, 2015 8:20 pm

Gasy wrote: Been missing that pic winchman ( might put my wheel pic up again in a min ) :D never catch you up tho
Framed prints are available :D
blueskink
Junior Bongonaut
Posts: 16
Joined: Sun Mar 08, 2015 8:31 pm

Re: Propex 2000 fitting with 8 seater

Post by blueskink » Mon Mar 16, 2015 9:25 pm

Tried deleting history but still no ability to log on.

What size gas bottle do you use Winchman, and how high is it, or how high is the cupboard?

Does the bed still fold flat?
User avatar
weebrian
Bongolier
Posts: 341
Joined: Mon Aug 15, 2011 6:03 pm
Location: Birmingham

Re: Propex 2000 fitting with 8 seater

Post by weebrian » Mon Mar 16, 2015 10:19 pm

Try logging in to http://igmaynard.co.uk . Thats how I got round the problem.
JoeC
Bongolier
Posts: 268
Joined: Wed Jun 25, 2014 9:00 pm
Location: The Home Of Ferodo.

Re: Propex 2000 fitting with 8 seater

Post by JoeC » Mon Mar 16, 2015 10:26 pm

Blueskink ... what was the price of the heater and where did you get it from in a sale?
Thanks.
blueskink
Junior Bongonaut
Posts: 16
Joined: Sun Mar 08, 2015 8:31 pm

Re: Propex 2000 fitting with 8 seater

Post by blueskink » Mon Mar 16, 2015 10:45 pm

I got it in Grimsby from Magnum Motorhomes for £420. Not a massive sale but it won me over when I was hesitating. They were selling it on Ebay so I was quite surprised that it was round the corner from me, no post to pay.
I just looked, and the sale is now over.
blueskink
Junior Bongonaut
Posts: 16
Joined: Sun Mar 08, 2015 8:31 pm

Re: Propex 2000 fitting with 8 seater

Post by blueskink » Mon Mar 16, 2015 10:47 pm

User avatar
Simon Jones
Supreme Being
Posts: 9341
Joined: Mon Aug 29, 2005 3:34 pm
Location: Salisbury (ish), Wiltshire

Re: Propex 2000 fitting with 8 seater

Post by Simon Jones » Mon Mar 16, 2015 11:51 pm

That's about the right sort of price. It's £429 from JustKampers: http://www.justkampers.com/propex-gas-h ... -only.html
winchman
Supreme Being
Posts: 1984
Joined: Sat Jan 07, 2012 1:34 pm
Location: St.Helens Merseyside

Re: Propex 2000 fitting with 8 seater

Post by winchman » Tue Mar 17, 2015 7:07 am

blueskink wrote: What size gas bottle do you use Winchman, and how high is it, or how high is the cupboard?

Does the bed still fold flat?
It was designed to take the smallest Propane 6KG I think? but as I had a 907 spare its currently got that in it.
You have to tip the rear seat forward to cook, the bed wont fold flat so you have to use a combination of flat middle seat and the front seats.
I originally designed it so I could insure it as a camper but keep all 8 seats, the insurance came down from £1000 to £200.
The seat is all the way back so takes no leg room from the passengers, using a second hand sink and stove it cost about £150 including a matching table.
I did look at the idea of manufacturing them but its too specialised so wouldn't be worth it as most people want different conversions, whilst mine works to lower the insurance I feel its not the most practical and would rather have a side conversion, but would loose some seats.
A few other people have made similar ones as they also wanted a cheap removable conversion
Post Reply

Return to “Campervan Conversions in Bongos”