Rear Heater Blanking Kit

Technical questions and answers about the Mazda Bongo

Moderators: Doone, westonwarrior

Post Reply
Donnie
Bongonaut
Posts: 99
Joined: Tue Sep 17, 2019 8:59 am
Location: Bedford, UK

Re: Rear Heater Blanking Kit

Post by Donnie » Sun May 03, 2020 10:05 am

I read them as being the 2 rear heater supply pipes like in the shop? https://bongoland.co.uk/product-categor ... em/page/2/
'96 AWD 2.5 diesel with AFT
Top
User avatar
Doone
Supreme Being
Posts: 2845
Joined: Sun Jul 04, 2004 10:58 am
Location: Devon
Contact:
Contact Doone

Re: Rear Heater Blanking Kit

Post by Doone » Sun May 03, 2020 11:11 am

Sorry to drag up an old thread but, if you use those caps, that means that both the pipes in red are removed completely, or not?
No they're not completely removed from the system.
Allan's closed. in Plymouth we recommend PGS (Plymouth Garage Services) or Mayflower Auto Services
Top
Donnie
Bongonaut
Posts: 99
Joined: Tue Sep 17, 2019 8:59 am
Location: Bedford, UK

Re: Rear Heater Blanking Kit

Post by Donnie » Sun May 03, 2020 1:05 pm

Bugger, ok, so they won't eliminate the worry of the pipes holing then :-(
'96 AWD 2.5 diesel with AFT
Top
User avatar
g8dhe
Supreme Being
Posts: 10221
Joined: Sun Apr 13, 2008 10:06 pm
Location: Worthing, West Sussex.
Contact:
Contact g8dhe

Re: Rear Heater Blanking Kit

Post by g8dhe » Sun May 03, 2020 2:12 pm

OK I was confused it is the heater matrix pipes! Not the cooling matrix, given that the heating matrix goes in from the side in the passenger footwell the diagram seems to show them going in from the front which looked more like the cooling one but they come in from the bottom rather than the side.
Geoff
2001 Aero V6, AFT, full side conversion.
Image Spherical Visions
Top
Post Reply

Return to “Techie Stuff”