Guys.

< http://lushprojects.com/bongopartsmk2/ >
is working OK for me - time 15.23 (GMT +8)

Regards,

Peter

Glad to be of help. :D

Shortly after we got "Belle", in December 2011, I noticed about a 1" water build up in the reversing/Indicator lense space.

Simple fix.

Small hole drilled at the lowest point of the plastic lense and then parked on a slope for 20 minutes while it drained. Bit of Bostik ...

Thanks for that, but unfortunately mine seems radically different to that diagram.

Is it this one?
< http://lushprojects.com/bongopartsmk2/code=5110A&cat=a2ajra0b&vin=&imgno=01of02.html >

I had a "coming together" with a wooden pole one time and wanted to replace the only brake lense ...

No its called failed translation :-) The characters are a partial transliteration of the codes used in the original text!
When Lush Projects grabbed the original site (from Mazda parts mtce. manual) it was partially translated using the translation engines of the time which weren't that effective ...

I've always assumed its the flip seat/footrest behind the front seats ?

Lush Projects calls that flip/footrest (part no. 57-11X) a < µ?AIY > Whatever that is in English. LOL!

See the diagram at < http://lushprojects.com/bongopartsmk2/code=5700A&cat=a2ajra0b&vin=&imgno=02of02.html#3>

Regards ...

23/03/2000 auto free top , diesel , 2500, AT, side L S differential , 4WD, with hyper sea. From VIN plate thanks to you! PS what is hyper seat?
Lifted left seat looked in (first time) found rubber pipe blanked off (turned thro 180 black plastis clip) think I know what that is!
Pete not new to ...

Alan,

< ..... how to check the AFT level. .... >

The ATF dipstick is under the RHS (GB driver's side) seat. It's towards the back of the engine, with a yellow cap. (Mine has anyway :D )

Pull it out, it's quite long, and on the end there should be 2 marks. For a quick check . With the engine ...

Alan,

We have a year 2000, 2.5 diesel and "Limp Mode" has happened twice to us.

First time was due to the auto gear box being overfilled on a service a couple of days before we set off. It went into limp (wouldn't rev above 15/1600 and just chugged along at its own speed in 3rd) with "Hold" light ...

Colin.

< ... i attached my phone to it and the led went out, unplugged the charger and the led came back on so the voltage that is there could just light the led but was pulled down when a bigger load was attached. I will try and find out where the voltage is coming from, ... >

The low voltage may ...

< .... By the way, if someone can point me at a place where we can buy the seal set for under a tenner, get in touch. Mazda UK sell them for £50 + VAT. We got them slightly cheaper from Singapore. .... >


Ian,

These folks may be of interest to you. They offer spares as an aside to their export ...

<.... I can turn the holder until I get a click but I can't pull the holder out from the unit... What am I missing? ... >

I used a pair of long nose pliers as my fingers are a bit too big to get in there. Turn the bulb holder about 45 degrees anti-clockwise, while putting a little bit of outward ...

Alkers.

I've been told that these are compatible.
Quote"
Fog Lights, Front, pre '99: from Mazda 323F V6
Fog Lights, Front, '99 and after: from Mazda 323 (99-01) and Mazda Premacy (99-01)
Unquote.

Not needed to check though, so use info at your risk LOL!

Regards,

Peter

cmm303 wrote:..........Just look at Bill and Ben, where would we be....? (Actually my comment is made in all seriousness )

Sitting with a little weed between the flowerpots?

Regards,

Peter

And the engine number on my year 2000 2.5TD is stamped on the front RHS of the block on a small "flat".

Watch your fingers if you've been running the engine. Been there, done that, left the skin. LOL!

Regards,

Peter

For anyone who is interested this is what I was quoted from Japan, delivered to my home in the Philippines.
This company will only deliver against a chassis number.

Part name QTY Price (USD)
Chassis Model
1. New Bush Rubber, Lwr S10H-34-460 x 1 USD 20
SGLR-401211 MAZDA BONGO FRIENDEE

2. New ...