Exactly the same is happening with mine - sometimes a longer delay before passenger and sliding door opens. Intermittent too

2.5TD AFT Pre facelift if that helps

I best add that how easy it is to fit the ksc-sw11 will depend on what outputs you have from the head unit - mine has a sub out connection and a remote on lead, if the head unit doesn't have those it will require a bit more work.

Funnily enough I was actually inspired by bongojoe's post about where he mounted his home made sub! So thank you Bongojoe for the idea! :)

That's exactly where the Ksc-sw11 went, Fits in perfectly on the side conversion- will try and take a photo - Mine is mounted a little higher than Bongojoes ...

I have had to replace the front pump as well. Was a bit of a shock when all the water came flooding out after removing the old pump, don't know why I didn't expect that!

Hi andyb36 - Sounds like you have a Lot of bass going on in the back, very good! all valid points - I have a side conversion so space is a bit of a premium so opted for a active sub ( Kenwood ksc-sw11) mounted just behind the drivers seat, really impressed with it for a little fella! :)

Hi ...

Always satisfying getting a job done on the bongo! Did the JBL's have the an o.k mounting depth? I have upgraded the stereo and put an active sub in but I haven't got round to replacing the front speakers yet, took off the door cards to have a look and that bleeding glue holding the speakers to the ...

Good use for of a Pi, that will give me some ideas! I recently got a Pi 2 during amazon sales and it currently has Retropie installed.

I also made my own as I couldn't find Rear Only - Slightly Jealous of Bongoplods 14squid though!

I opted for Thermal screen material and suction pads from http://www.olearymotorhomes.co.uk/screens-blinds--curtains-49-c.asp. Only needed 1metre as it was 1.6 m wide. Cut to size and had plenty left ...