Finally got round to sorting this, thanks for the guidance, bongo spares to the rescue as ever. Took all of 3mins to swap it out and now no warning light on when driving, happy days.

Hi, the sensor on the bottom corner of the drivers door has snapped/broken so now the light won’t go out on the dash. Any ideas where I can get a replacement or is it a universal eBay type item, just need to check the size? I search through old posts etc but the only one that seems to have link to e...

Got carried away having found the remaining offending wiring and removed the roof lining from the rear. On the upside now got everything connected correctly again and removed the red and black that was confusing me! Now just waiting for new parts to wire it all up properly. Thanks very much Geoff an...

Just trying to put back original so I can do swap loom properly when that arrives (just ordered this morning) I had a feeling something wasnt right given the colours etc of everything else (doesn't help I'm mildly colourblind but thankfully the mrs is happy to check colours!) Having just checked the...

Going to show my lack of electrical knowledge again. I can connect the red wire from interior lights to top left 10a fuse and happily they work. Not sure how originally connected though as there is already a blue wire with red stripe in that slot. Is it ok just fix in with that? And then what do I d...

Thanks again Geoff, found that one yesterday and was planning on ordering from solar camper solutions too, but that will have to wait till I can afford to get a good quality kit hence planning ahead

Hi All, So been researching, and reading previous posts, perhaps too much and now overthinking it all. Once I've restored the original connections I need to fit a VSR split charge circuit and swap loom circuit so that having the leisure battery is actually useful too. I think I'm correct that the tw...

Thanks Bob and Geoff, lots more fun planned for the weekend then!

Thanks again Geoff, will get on with resetting the wiring at weekend and look for parts to wire in proper LB with VSR and swap loom. Do you know where the wire for the internal lights that goes up the drivers door frame should originally be wired in to, I can spot where that was cut out from. The re...

Hi again, Not managed to test the solenoid yet as discovered some interesting wiring adjustments by a previous owner....seemingly however the central locking Is working again but think I have a loose connection track down later! For now though I need some help figuring out what the wires should look...

Thanks for the quick reply Geoff I figured I’d need to test where the link is broken but I’m going to show my lack of knowledge and ask how I do that. I have a multimeter and removed the door card. Most connections look ok but can’t see where to test the voltage and don’t know if I should only get a...

We have a 96 Bongo with central locking but the passenger door has stopped working. It still locks fine from key or inside of that door but won’t from using the drivers lock. The rear sliding door still works which suggests I think that it’s not the relay. I’ve checked the wiring in the loom on the ...