Hi all

Thanks very much for your help......will give it a go!

Cheers

Steve

Iv'e managed to get hold of a 626 speedo from the srappie and wondered if anyone knows how to change the mileage on the clock face

Hi all

I've just finished fitting a new TPS on the Bongo....engine ticks over fine but when I increase the revs the hold light starts to flash...any idea's please??

Have checked Bigdaddy but looks ok to me

Thanks for that Max but I've checked all the fuses and bulbs in cab and engine bay... all ok
Are there any others I may have missed?

Hi All

I managed to get hold of a 626 Mazda speedo unit (wanted mph instead of kph) popped the whole unit in switched ignition on.....big smell of burning!! switched off and removed unit. Part of the circuit on the rear had burned out. Replaced unit with original but now the oil pressure light and ...

Just had mine re-gassed by Kwik Fit, excellent job for just over £40 quid

I recently had 195 Goodyear G2 tyres fitted to the front and the tracking done at the same time by my local garage (about 6 months ago). Both tyres have started to scrub out on the inside so I guess the camber needs looking at.
Can anyone recommend one of the national tyre companies (Kwik-Fit etc ...

Finally got round to doing the electrics yesterday, no problem at all just followed Corblimy's instructions to the letter and was done in a couple of hours!

Thanks "C" your a star!!

Hi Corblimey

I was going to go down Pippin's (cutting wires)route but this seems a much safer and easier way of getting a permanent live feed to the blinds, mirrows etc.

Could you tell me what size wire you used for the new loom
Type of fuse box used (leisure battery end)and how you connected ...

Cheers Bonz

Managed to find exactly the same thing from our local farmers store.....easy peasy, sucked out over a litre and half of oil. Re checked levels a couple of times, no problem!

Thanks again, much appreciated

Thanks for that Colin Will run and check tonight.
What equipment would I need to suck oil out if still over full ?

Hi all
How critical are the level's on the gearbox dipstick.? I've just had mine in for a full service and on re checking (when engine was cold) found that the fluid was about an inch over full!