Search found 8 matches
- Sun Dec 15, 2019 12:47 am
- Forum: Breaking Bongos
- Topic: AUTO GEARBOX WANTED UM711 or UM710
- Replies: 14
- Views: 10422
Re: AUTO GEARBOX WANTED UM711 or UM710
Bit of an update. Having had a look at the gearbox PDF that was kindly sent to me I have noticed that the sensor I have changed on the gearbox by the bell housing on the drivers side is actually the turbine sensor and the speed sensor or vss as it's called is located by the gear change switch lower ...
- Sat Dec 14, 2019 10:53 am
- Forum: Breaking Bongos
- Topic: AUTO GEARBOX WANTED UM711 or UM710
- Replies: 14
- Views: 10422
Re: AUTO GEARBOX WANTED UM711 or UM710
So disconnected battery and pressed brake pedal 5 times , reconnected battery but still have hold light flashing and glow plug light also flashing in alternated sequence.
So back to square 1 !
So back to square 1 !
- Thu Dec 12, 2019 6:18 pm
- Forum: Breaking Bongos
- Topic: AUTO GEARBOX WANTED UM711 or UM710
- Replies: 14
- Views: 10422
Re: AUTO GEARBOX WANTED UM711 or UM710
No haven’t spoken to him as yet, I see he is a regular Contributor to this forum and hope he posts up some advice.
- Thu Dec 12, 2019 5:35 pm
- Forum: Breaking Bongos
- Topic: AUTO GEARBOX WANTED UM711 or UM710
- Replies: 14
- Views: 10422
Re: AUTO GEARBOX WANTED UM711 or UM710
Yes dropped the box and replaced the torque . Yet still no gears. Had another thought , having changed the TPS and Speed Sensor, If the van had these faults already in its ecu memory, maybe I will try disconnecting the battery and press the brake pedal 5 times to clear the ecu and try again. Not tod...
- Wed Dec 11, 2019 6:39 pm
- Forum: Breaking Bongos
- Topic: AUTO GEARBOX WANTED UM711 or UM710
- Replies: 14
- Views: 10422
Re: AUTO GEARBOX WANTED UM711 or UM710
Just fitted the tps in the same position as the old one then tried it but again no Drive. To recap then, Changed torque converto ( pre loaded) Changed speed sensor Changed tps Cleaned filter Changed fluids and topped up whilst running to level Glow plug light flashes as well as the hold light in seq...
- Wed Dec 11, 2019 2:50 pm
- Forum: Breaking Bongos
- Topic: AUTO GEARBOX WANTED UM711 or UM710
- Replies: 14
- Views: 10422
Re: AUTO GEARBOX WANTED UM711 or UM710
I am in Birmingham .
Btw , changed Throttle position sensor as well as the sensor on the box although I now see it has 2 of them.
Btw , changed Throttle position sensor as well as the sensor on the box although I now see it has 2 of them.
- Tue Dec 10, 2019 10:13 pm
- Forum: Breaking Bongos
- Topic: AUTO GEARBOX WANTED UM711 or UM710
- Replies: 14
- Views: 10422
Re: AUTO GEARBOX WANTED UM711 or UM710
Having tried bongo spares they do not have a gearbox. However, having had a long chat with Ian who sent me an offer of a gearbox, he suggested perhaps it is an ecu problem or some electrical problem as the box engages but does not drive. If anyone can help with this it would be appreciated, I can ge...
- Wed Dec 04, 2019 6:02 pm
- Forum: Breaking Bongos
- Topic: AUTO GEARBOX WANTED UM711 or UM710
- Replies: 14
- Views: 10422
AUTO GEARBOX WANTED UM711 or UM710
Looking to buy a gearbox for our 2.5 td 2000
Can collect
Can collect