Hi everyone, Costas, so sorry your back to square one again I know how you are feeling. I am still trying to resolve this exhausting problem, I have changed two solenoids under the passenger seat and I thought the problem had been resolved but took it for a run this morning and the flashing light is...

https://igmaynard.co.uk/bongo/forum/download/file.php?mode=view&id=248 Hi Bob, It’s certainly the right part number, but mine is bolted the passenger side chassis along with a brown solenoid and in some way influences the opening and closing of the turbo. The on the passenger side must measure t...

Hi Bongolia, I have all the part numbers off the body of the solenoid, I’ve contacted Ian who informs me that this part is no longer available, But there is a replacement part available from Mazda RF4F18211 I have not followed this up as of today. To be honest I was a bit puzzled with one of the pos...

Hi g8dhe, I'm a bit puzzled, I assumed that this controlled the boost to the turbo which is isn't happening at the moment. When my electrician connected a feed directly to the plug with the solenoid disconnected the actuating arm on the turbo moves. Does the EGR's effect the operation of the turbo? ...

https://igmaynard.co.uk/bongo/forum/download/file.php? mode=view&id=232https://igmaynard.https://igmaynard.co.uk/bongo/forum/download/file.php?mode=view&id=230co.uk/bongo/forum/download/file.php?mode=view&id=231 Hi g8dhe, Thank you for your reply, any information on this sensor would be ...

Hi All, Still trying to solve my turbo problem, I have a friend who is a electrician who seems to think that the problem is caused by the black sensor boost solenoid under the passenger seat, he has asked me to try to confirm what this solenoids function is, Is it a potentiometer Is it a triack devi...

Hi Bob,

It’s a 2001 2.5 td, it has the horizontal actuator arm.

Cheers

Clayton

Hi guys, I’m looking for some information regarding the wiring to the brown solenoid under the passenger seat that controls the turbo, There are two wires that feed it red and blue / white and blue what are their function, and where does the power come from. I have no power to that solenoid, but whe...

Morning everybody,

Just a quick question, I have a horizontal type turbo actuator arm which way is open left or right.

Thanks guys

Hi guys, just thought I’d start a new thread and not continue on costas thread. My problems so far are initially I had a 0400/1228 which occurred after about 10 miles or so. I cleaned both egr valves and re checked all the solenoids. The 0400/1228 codes disappeared, now I have a glow plug light that...

Hi guys, well mister muscle didn’t work for me a little disappointed, but the I only have one error code now 0400 has disappeared and so has 1228 what it’s showing now is a 1227 it’s still a turbo code so I intend to have a closer look at the red and white solenoids under the drivers seat. Any other...

Hi guys, well that gives me motivation to carry on with my problem, thanks costas for the detailed video it will be invaluable information for anyone with this problem, so mr muscle it is.

Thanks once again Rhondda boy.

Hi everyone, after all my efforts I now have a glow light flashing all the time, has anyone have any ideas.

Thank you

Hi all, just a update on my 0400/1228, both egr valves removed and cleaned (really not that dirty just a light coating of soot) all 6 solenoids tested at running temp with a separate 12 volt supply all are clicking away. Took the van for a short drive about 10 miles and glow light started flashing, ...

Hi all, I’ve checked all six, two under the passenger seat and four under the drivers seat and all the associated vacuum pipes all seem ok. My next post of call is the two egr valves located at rear top of engine opened panel at rear of cabin but still looks awkward,not sure easiest way to tackle it...