Also… is there a a way to test the rad fans?

As when I bypassed the pressure switch the first time. One rad fan came on! Now none of them do…

Tried bypassing the relays b6-01/02/03
But no luck

Hi, yeah that sounds fair, When we gassed it last year it wasnt working, but a the time he said that the AC Belt was missing, and that once fitted everything should work, if not he said it would be the compressor.. so he said he would leave the gas in, and any problems take it back and he will take ...

So was actually really gased last year, hasn’t worked since,

Can these switches fail. Or is it likely just to be low pressure?

So good news is…. If I short out the switch mentioned the clutch engages! And also one of the radiator fans started spinning, ( the first time it did the second time it didn’t) So now can I replace it with gas in the system? Or does it need to be drained first? Also after I shorted it and all was “w...

Thank you,
Would you know where that sensor would be?

Hello So after resolving my fan problem (Again!) I am now looking into the AC, So this has never worked and even previous owner never got it to work I fitted the missing belt and got it regased, but no colder I noticed the clutch plate on AC Compressor was not engaging, I Manually applied power to t...

Hello so I’m trying to hunt down my oil leak,,, Looks like it’s coming out of the water elbow joint to the cylinder head, Is this possible for oil to leak here or is it just a red herring? https://i.postimg.cc/7fR0r2tJ/68-FA9-FC4-87-FB-444-C-9-BAB-A5-D0-D61-D7967.png https://i.postimg.cc/BXbHzgpG/DE...

Perfect thanks, so good news for me!
Yes first thing I did, was over half way between min and max,

Will clean up all the oiled up connectors tomorrow, and recheck and hoping for smooth sailing!
Also will look as to where that oil is leaking from!

Thanks! So update! I unplugged both sensors and the Oil light didn’t even come up with the Test at the start, I plugged in the pressure sensor again and the oil light did the test at start up. I left the level switch unplugged, and drove it around. And the light did not come back on! So am I right i...

Hi, Yes was aware there was the level switch in line as well. was not sure if there is away to test it other than replace it.? With the signal wire i take it i can disconnect from pressure switch and drive with a DVM testing continutity against ground. to see if it grounds out ? then can replace cab...

Good Morning all So for the last month or so i have been having an intermittant oil light, normally comes on a few minutes into the drive and then will turn off again after a while, sometimes may come on again, Sometime wont come on at all. Tackled the first task of replacing the pressure switch yes...

I’ve been thinking about how easy it would be to fit a Landrover TD5 engine in one,
I mean I’ll never do it, but I would love to

Hmm thanks! I bought 3 spare ones so might have to try again, would any of the other components in the transister pack be able to cause such an issue?

I’m just glad we have heating again!

So an update if anyone is reading this, Measured the voltage getting to the fan relay and transister, and it was all about 3v So went back to the earth point I repaired last time and found that the connector had corroded and broken again! I re connected the earth and all seems to be working now, I b...

So fans ran perfectly for 2 months, Then decided to stop working again, Straight Way thought it was corrosion in the plug, so tried to clean it up and ended up removing the plug and crimping the wires together for now and I’ll replace the plug when I get home ( on holiday) unfortunately this did not...