Search found 11 matches
- Mon Oct 15, 2012 12:46 pm
 - Forum: Campervan Conversions in Bongos
 - Topic: rock and roll bed
 - Replies: 7
 - Views: 3680
 
Re: rock and roll bed
From the phone area, 01942 is Wigan. If that helps anybody.
		- Mon Oct 15, 2012 12:42 pm
 - Forum: Techie Stuff
 - Topic: Diesel in on board water tank!!
 - Replies: 13
 - Views: 4803
 
Re: Diesel in on board water tank!!
I assume this is sorted out by now, but if anyone is searching for a solution and checks this thread, take a look at Bio Magic Tank cleaner (see http://www.dairymax-uk.co.uk/ ) There are more up-to-date company websites, or they sell on Amazon, but that site has more info at the moment. I saw it ...
		- Fri May 25, 2012 6:04 pm
 - Forum: Techie Stuff
 - Topic: Draining Coolant
 - Replies: 24
 - Views: 8851
 
Re: Draining Coolant
 From looking at the manual I thought the top-hose drain plug was behind the radiator. Looking at these diagrams, it's under the driver's seat. I can't find it in either place!
Can anyone give a bit more of a clue or a picture to help locate it? is it only visible after the plastic undershield is ...
		Can anyone give a bit more of a clue or a picture to help locate it? is it only visible after the plastic undershield is ...
- Fri May 25, 2012 3:15 pm
 - Forum: Techie Stuff
 - Topic: Draining Coolant
 - Replies: 24
 - Views: 8851
 
Re: Draining Coolant
From looking at the manual I thought the top-hose drain plug was behind the radiator. Looking at these diagrams, it's under the driver's seat. I can't find it in either place!
Can anyone give a bit more of a clue or a picture to help locate it? is it only visible after the plastic undershield is ...
		Can anyone give a bit more of a clue or a picture to help locate it? is it only visible after the plastic undershield is ...
- Fri Jan 27, 2012 10:46 pm
 - Forum: Campervan Conversions in Bongos
 - Topic: Can you tell what it is yet?
 - Replies: 46
 - Views: 22221
 
Re: Can you tell what it is yet?
Hi Dave,
you sent me a copy of your drawings. Thanks for that. Where did you get the seat swivel, and how did you choose the version? I found http://www.campervanconversion.co.uk/shop/c/seat-swivels , but there are a lot of different models there!
Maybe you could contact them, and let them market ...
		you sent me a copy of your drawings. Thanks for that. Where did you get the seat swivel, and how did you choose the version? I found http://www.campervanconversion.co.uk/shop/c/seat-swivels , but there are a lot of different models there!
Maybe you could contact them, and let them market ...
- Tue Nov 15, 2011 1:38 pm
 - Forum: Techie Stuff
 - Topic: Engine warm-up Exhaust flap
 - Replies: 12
 - Views: 5245
 
Re: Engine warm-up Exhaust flap
Hi D+P, thanks for the suggestions.
Unfortunately I wasn't following the thread properly after my last post...
Anyway, I took my tyre pressures up to 40psi after the last fill-up, and the last 190 miles was two 60-mile runs plus a little local running, being light-footed. That turned in 22mpg.
I ...
		Unfortunately I wasn't following the thread properly after my last post...
Anyway, I took my tyre pressures up to 40psi after the last fill-up, and the last 190 miles was two 60-mile runs plus a little local running, being light-footed. That turned in 22mpg.
I ...
- Wed Oct 26, 2011 11:38 am
 - Forum: Techie Stuff
 - Topic: Engine warm-up Exhaust flap
 - Replies: 12
 - Views: 5245
 
Re: Engine warm-up Exhaust flap
 I'm surprised that I've not been able to find an exploded diagram for that part . Let us know what you find out... 
There are diagrams in the engine manual. The rod pushes and pulls a crank on a shaft carrying a butterfly valve. There are two bolts sticking up that can be adjusted as stops to set ...
		There are diagrams in the engine manual. The rod pushes and pulls a crank on a shaft carrying a butterfly valve. There are two bolts sticking up that can be adjusted as stops to set ...
- Wed Oct 26, 2011 10:45 am
 - Forum: Techie Stuff
 - Topic: Engine warm-up Exhaust flap
 - Replies: 12
 - Views: 5245
 
Re: Engine warm-up Exhaust flap
That's right. Item 13-540 in that diagram.
Ah well, it was stuck, but in the right position (the rod was 'pushed' out). By working the valve backwards and forwards with a socket on the end of the shaft, I freed it, then found that if the switch was on the rod was pulled. It's working now, in case I ...
		Ah well, it was stuck, but in the right position (the rod was 'pushed' out). By working the valve backwards and forwards with a socket on the end of the shaft, I freed it, then found that if the switch was on the rod was pulled. It's working now, in case I ...
- Tue Oct 25, 2011 10:09 pm
 - Forum: Techie Stuff
 - Topic: Engine warm-up Exhaust flap
 - Replies: 12
 - Views: 5245
 
Engine warm-up Exhaust flap
Hi,
I want to check that the exhaust shutter is properly open. From the engine manual illustrations the lever is moved by a diaphragm and rod. Could anyone tell me whether the rod pushes or pulls to open the flap? Otherwise I think I'll need to remove the unit so I can see through the pipe. At the ...
		I want to check that the exhaust shutter is properly open. From the engine manual illustrations the lever is moved by a diaphragm and rod. Could anyone tell me whether the rod pushes or pulls to open the flap? Otherwise I think I'll need to remove the unit so I can see through the pipe. At the ...
- Fri Oct 21, 2011 5:27 pm
 - Forum: Bongo Chat
 - Topic: London Low Emissions Zone
 - Replies: 44
 - Views: 89272
 
Re: London Low Emissions Zone
Just checked my reg and they have it down as exempt already. Looks like they've been listening.
Jim
		Jim
- Sun Oct 02, 2011 6:47 pm
 - Forum: Yorkshire & North East
 - Topic: roll call for Yorkshire and North East
 - Replies: 212
 - Views: 231916
 
Re: roll call for Yorkshire and North East
Hiya,
Just bought a Bongo, and I'm collecting it on Thursday
 Another Sheffield Resident!
Jim
		Just bought a Bongo, and I'm collecting it on Thursday
Jim




