Hi Scribe,
Have you had any previous coolant leaks.If so was the system bled properly.Some times you can get delayed problems if this is the case.(Metal Fatigue)etc.

Hope not.

as a reminder this glorios bongo has been parked up for 3 months ,due to me/hospital/recovery. but will now not move ,its wt 2.5 auto. several members suggested that i should check each wheel for stuck brake, which i did , and all wheels are free ,well they move by the amount of slack in the transm...

Hi bobngo,

Jack it up and check the brakes have not stuck on.

Hi Boots,

Got the same one,no problems with it.

Hi daveblueozzie.

Could you tell me the temp gauge position before you replaced the thermostat.

Did you test the thermostat before you fitted it.??

Doone wrote: Exactly what are you getting for £2500?

They might be filling it up with Diesel.

Hi bawgixer,

If it Is a Blank Switch ie a (Dummy),it is probably for the front fog lamps..

If you follow the wiring you will see the lamp connectors at the end.

Ps did I see you in L##### or C######.

Hi Miker,

Is there a bullet connector near the module,could it be a bad connection there.

I would have thought that there was also a way of testing the module ie fitting a loop ?..

The pipe sounds to me me like the gearbox breather - if it is then it definitely shouldn't be connected to anything as you risk blocking it (depending on what it is you are connecting it too) & this is very bad news for your gearbox. Remember to have the engine running in park (preferably with ...

Ok thanks guys,

It looks like A Band on Ship..

thanks..

cheffy34 wrote:what you mean the crap magnet behind the gearstick

http://i59.photobucket.com/albums/g320/ ... car006.jpg


something like this

Hi,Cheffy
No I want to remove the cubby box completely.
And fit it back in at a latter date.

thanks..

Hi Tonic,

No, I mean the large Cubby below the heater controls on the dash.

Thanks..

Hi,
I want to remove the large Cubby (behind the gear selector).Has anybody removed there's,if so how is it done,ie is it clipped in or glued etc etc..

thanks..

Is the scavenger fan sensor the same as the 'engine bay sensor here? http://www.bongobits.com/Main.asp?PageName=ProductDetails&Department=3&Category=64&Product=260 is this part the same as, and interchangable with the mx-5 air flow sensor here? http://www.autolinkmx5.com/index.asp?funct...

widdowson2008 wrote:Another query?

Thanks for the pm Geoff.

What does FICD stand for?

Fast Idle Control Device