Sliding door middle runner catching
Moderators: Doone, westonwarrior
-
- Apprentice Bongonaut
- Posts: 2
- Joined: Mon Sep 16, 2019 11:40 pm
Sliding door middle runner catching
The middle runner on the sliding door seems to have a lot of play between the pin and the groove and when pulled forward seems to twist in and catch, causing a grind...making the door hard to move. The ball bearing looks ok and doesn’t seem to be the issue. Is this a common issue, is there an easy fix?
- g8dhe
- Supreme Being
- Posts: 10221
- Joined: Sun Apr 13, 2008 10:06 pm
- Location: Worthing, West Sussex.
- Contact:
Re: Sliding door middle runner catching
Not heard of any damaged guides normally its a bit of grit, sand, clip or something in the track causing grief. Very often its the lower guide down below the step that gets filled and needs brushing out.