abs sensor

willow2u · Post by **willow2u** » Fri Jul 17, 2020 8:35 pm

There for a daewoo and gm Cars

Post by **g8dhe** » Fri Jul 17, 2020 8:48 pm

Ah ha we have it https://www.autodoc.co.uk/spares-search ... d=412w0663

willow2u · Post by **willow2u** » Fri Jul 17, 2020 8:58 pm

Like I said in earlier post ultimately cheaper on the bay

TallPaul · Post by **TallPaul** » Fri Jul 17, 2020 10:09 pm

Thanks for that info, timely as my front passenger side sensor has died. Do you have a link or part no. For the connector? I can't seem to find one. Are they 'superseal' connectors?

Cheers

Paul.

willow2u · Post by **willow2u** » Fri Jul 17, 2020 11:07 pm

263063123791 Is the item no on eBay are the ones I’ve bought there are some cheaper ones from China but these guys promise same day despatch

TallPaul · Post by **TallPaul** » Fri Jul 17, 2020 11:28 pm

Cheers, on nights tonight so I'll order them later.

willow2u · Post by **willow2u** » Mon Jul 20, 2020 7:20 pm

Connectors arrived today bit disappointed they are slightly smaller so I ran a Stanley between the 2 pins and slid a Packer in between and it fits I’ll put a dab of silicon around the water sealing seal when it goes on for good got some photos

JimmyB · Post by **JimmyB** » Wed Jul 29, 2020 3:35 pm

Hi willow2u,
Great post, Thank you. My front nearside sensor has gone and I was just wondering if the Ohmic value of the sensor matches the circa 1600 of the original or did you have to add resistors?

Cheers

willow2u · Post by **willow2u** » Fri Jul 31, 2020 5:55 pm

If someone knows the original resistance I’ll check them

JimmyB · Post by **JimmyB** » Sat Aug 01, 2020 4:32 pm

I checked mine to find the faulty one and all three good ones read 1640 Ohms. I'm going to fit one using your method but I was just curious to find out what the resistance was.

Ta

willow2u · Post by **willow2u** » Sat Aug 01, 2020 8:25 pm

Went to check resistance and my meter died

JimmyB · Post by **JimmyB** » Sun Aug 02, 2020 9:11 pm

Isn't that just like the thing

Kaysee_sw · Post by **Kaysee_sw** » Fri Aug 07, 2020 7:37 am

Any updates on this? I need to replace a sensor asap and don't really want to pay £200 for sensor if this one is confirmed as working.

JimmyB · Post by **JimmyB** » Fri Aug 07, 2020 8:26 am

Hi,
My sensor has just arrived this morning and the resistance of the sensor (without cabling and connectors) is 1240 Ohms. I am going away this weekend so it will be next week before I fit it to the bongo but as an electrician I would reckon it is not going to be far off the 1640 Ohms of the others. $\:D/$

Will post again next week.

willow2u · Post by **willow2u** » Fri Aug 07, 2020 11:53 am

got a battery for the tester and my sensor reads 1298 i think between 800-2000 is the norm so should be ok

abs sensor

Re: abs sensor

Re: abs sensor

Re: abs sensor

Re: abs sensor

Re: abs sensor

Re: abs sensor

Re: abs sensor

Re: abs sensor

Re: abs sensor

Re: abs sensor

Re: abs sensor

Re: abs sensor

Re: abs sensor

Re: abs sensor

Re: abs sensor