EGR Blanking

Technical questions and answers about the Mazda Bongo

Moderators: Doone, westonwarrior

Post Reply
NZ Friendee
Apprentice Bongonaut
Posts: 6
Joined: Thu Oct 22, 2020 11:04 am

Re: EGR Blanking

Post by NZ Friendee » Thu Oct 22, 2020 11:24 am

Is there any chance you have a dxf file you can share for the egr blanking plates. I’m in New Zealand and have access to a laser cutter.
Top
Bob
Supreme Being
Posts: 15263
Joined: Wed Oct 17, 2007 12:54 pm
Location: North Somerset

Re: EGR Blanking

Post by Bob » Fri Oct 23, 2020 9:33 am

I guess you could make a pattern with some thick paper and a crayon? :wink:
Top
User avatar
Doone
Supreme Being
Posts: 2845
Joined: Sun Jul 04, 2004 10:58 am
Location: Devon
Contact:
Contact Doone

Re: EGR Blanking

Post by Doone » Fri Oct 23, 2020 12:08 pm

There is a gasket between the EGR joint. You could draw around it.
Allan's closed. in Plymouth we recommend PGS (Plymouth Garage Services) or Mayflower Auto Services
Top
NZ Friendee
Apprentice Bongonaut
Posts: 6
Joined: Thu Oct 22, 2020 11:04 am

Re: EGR Blanking

Post by NZ Friendee » Thu Nov 05, 2020 5:51 pm

Yeah that’s plan B. Was just being a bit lazy
Top
Django
Apprentice Bongonaut
Posts: 1
Joined: Sat Apr 20, 2024 11:13 am

Re: EGR Blanking

Post by Django » Sat Apr 20, 2024 11:16 am

robhho123 wrote: ↑Thu Sep 10, 2020 10:58 am Hi All

After reading on here about EGR blanking and speaking to my dad that used to blank them off on race cars as it's loss of power etc and really not
needed but obviously has to be done for emissions wise. I have opted to Blank it off to stop all the gunk getting into the inlet to hopefully prevent any issues later down the line. So my plan is to take the pipe of this weekend and draw up the blanks then cnc machine them, My question is does anyone want any at the same time as I might as well make a few at the same time.

Rob
Hi Rob
Do you have any blankig plates made up & looking for a new home?
Top
Post Reply

Return to “Techie Stuff”