EGR Blanking

Technical questions and answers about the Mazda Bongo

Moderators: Doone, westonwarrior

NZ Friendee
Apprentice Bongonaut
Posts: 6
Joined: Thu Oct 22, 2020 11:04 am

Re: EGR Blanking

Post by NZ Friendee » Thu Oct 22, 2020 11:24 am

Is there any chance you have a dxf file you can share for the egr blanking plates. I’m in New Zealand and have access to a laser cutter.
Bob
Supreme Being
Posts: 15255
Joined: Wed Oct 17, 2007 12:54 pm
Location: North Somerset

Re: EGR Blanking

Post by Bob » Fri Oct 23, 2020 9:33 am

I guess you could make a pattern with some thick paper and a crayon? :wink:
User avatar
Doone
Supreme Being
Posts: 2839
Joined: Sun Jul 04, 2004 10:58 am
Location: Devon
Contact:

Re: EGR Blanking

Post by Doone » Fri Oct 23, 2020 12:08 pm

There is a gasket between the EGR joint. You could draw around it.
Allan's closed. We recommend PGS (Plymouth Garage Services) or Mayflower Auto Services in Plymouth.
NZ Friendee
Apprentice Bongonaut
Posts: 6
Joined: Thu Oct 22, 2020 11:04 am

Re: EGR Blanking

Post by NZ Friendee » Thu Nov 05, 2020 5:51 pm

Yeah that’s plan B. Was just being a bit lazy
Post Reply

Return to “Techie Stuff”