Drivers door dropped

[turfite9999]

Hi guys hope you are all well,
my drivers door seems to have dropped so have to lift to close, does anyone know of a fix, or how to remove the door.

Many thanks in advance

Tony

[Northern Bongolow]

I know the A post is just a bit of bent tin, really thin, it's either been bent or the bottom maybe rotten and it's moved forwards allowing the door to move downwards/forwards.
This is a well know rot spot behind the front wheel, front end of cill etc

[turfite9999]

Thank you I will look at that Vanessa

[turfite9999]

Hi guys does anyone have any experience of removing drivers door so I can get at the hinge that`s connected to the wing or near the wing,

Thank you in advance

Tony

[Bob]

I can only think support it, maybe ropes tied to something, then undo the bolts.

Obviously disconnect the loom first.

[turfite9999]

Thanks Bob

[turfite9999]

sorry to go on about this, does anyone know if you have to take off the wing to replace door hinge rods please I`m struggling to get info, and does anyone know what bush/rod size to get

many thanks

Tony

[Doone]

Discussion continues here: viewtopic.php?f=3&t=77862
This post now locked.