drivers door hinge pins

Technical questions and answers about the Mazda Bongo

Moderators: Doone, westonwarrior

User avatar
turfite9999
Bongonaut
Posts: 70
Joined: Wed Jan 31, 2018 1:50 pm
Location: Blackpool

drivers door hinge pins

Post by turfite9999 » Fri Apr 09, 2021 10:47 am

Hi guys does anyone know the size of the drivers door hinge pins and bushes please, dont know if I can get standard or generic ones.
:oops: many thanks
In desperation

Tony
User avatar
g8dhe
Supreme Being
Posts: 8987
Joined: Sun Apr 13, 2008 10:06 pm
Location: Worthing, West Sussex.

Re: drivers door hinge pins

Post by g8dhe » Fri Apr 09, 2021 10:59 am

Never heard of anyone needing to, the pins aren't shown as separate items on the parts diagrams either, just the entire hinge.
Geoff
97 V6, AFT, full side conversion.
Image Spherical Visions
rita
Supreme Being
Posts: 3247
Joined: Tue Sep 15, 2009 7:11 pm

Re: drivers door hinge pins

Post by rita » Fri Apr 09, 2021 11:24 am

If you knock out the pin and measure it you should be able to get new pins and bushes from ebay or amazon etc .



example


https://www.ebay.co.uk/itm/Bushing-Kit- ... ZgQAvD_BwE
User avatar
turfite9999
Bongonaut
Posts: 70
Joined: Wed Jan 31, 2018 1:50 pm
Location: Blackpool

Re: drivers door hinge pins

Post by turfite9999 » Fri Apr 09, 2021 12:23 pm

Thank you guys for your reply, I`m almost sure its the pins but dont want to take off wing before buying replacements, I think you have to take off wing to knock them out and measure?

Thank you guys
rita
Supreme Being
Posts: 3247
Joined: Tue Sep 15, 2009 7:11 pm

Re: drivers door hinge pins

Post by rita » Fri Apr 09, 2021 9:52 pm

You dont need to take the wing off, just remove a hinge knock the pin out and measure pin , put the pin back in a refit hinge order kit .
User avatar
turfite9999
Bongonaut
Posts: 70
Joined: Wed Jan 31, 2018 1:50 pm
Location: Blackpool

Re: drivers door hinge pins

Post by turfite9999 » Sat Apr 10, 2021 9:27 am

Thanks Rita Ill have a go