Fitting a front wheel bearing- will I need a press?

Technical questions and answers about the Mazda Bongo

Moderators: Doone, westonwarrior

Post Reply
Bongobabs
Apprentice Bongonaut
Posts: 4
Joined: Tue Apr 06, 2021 1:47 pm

Fitting a front wheel bearing- will I need a press?

Post by Bongobabs » Mon May 31, 2021 9:12 am

Hi All,

Anyone who has fitted a front wheel bearing have any experience that might help me with the job?

And will I need a press?

Thanks in Advance.
TBane
Apprentice Bongonaut
Posts: 1
Joined: Fri Jun 25, 2021 12:55 pm

Re: Fitting a front wheel bearing- will I need a press?

Post by TBane » Fri Jun 25, 2021 1:00 pm

I can confirm that as well. I had the issue a couple of months back when they made the switch from the two-piece to the one-piece. Took calling customer service 4 times before they got me the correct instructions. As previously stated insert the bolts from the opposite side of the wheel into the bearing housing.
Post Reply

Return to “Techie Stuff”