Hold flashing and error with diagnostic port
Moderators: Doone, westonwarrior
Re: Hold flashing and error with diagnostic port
I have disconnected both negative terminals on the SB and LB, held the brake for 10+ seconds, reconnected, started and idled for a couple of minutes. The errors are still showing on the led and hold light on the dash. Do you need to have the jumper and led wires disconnected to do the error reset?
- g8dhe
- Supreme Being
- Posts: 10221
- Joined: Sun Apr 13, 2008 10:06 pm
- Location: Worthing, West Sussex.
- Contact:
Re: Hold flashing and error with diagnostic port
No as far as I know the error codes stay until the problem is resolved, then they will reset themselves as it were.
Re: Hold flashing and error with diagnostic port
it was me that blew the engine fuse that powers the diagnostic socket
LDON SE
BONGO 2.5TD auto 4WD 1996
SGL5
« Je ne sais qu'une chose, c'est que je ne sais rien. »
BONGO 2.5TD auto 4WD 1996
SGL5
« Je ne sais qu'une chose, c'est que je ne sais rien. »