V6 Removing Spark Plugs

chooyuhudson · Post by **chooyuhudson** » Mon Feb 14, 2011 3:40 pm

Please excuse my ignorance, however to remove spark plugs I assume I turn them anti-clockwise looking down into the engine?

Kind regards David

Northern Bongolow · Post by **Northern Bongolow** » Mon Feb 14, 2011 3:42 pm

yes,but do it with steady pressure,dont bang them loose.

chooyuhudson · Post by **chooyuhudson** » Mon Feb 14, 2011 3:46 pm

Thanks for that Ady. If they are quite stiff and wont move, should I spray WD40 in to loosen them, or could that do some harm? Cheers

Northern Bongolow · Post by **Northern Bongolow** » Mon Feb 14, 2011 3:54 pm

it should do no harm,just dont overdo things.
when replacing check the torque settings for refitting, (ally head and all that.) always take care when its ally to steel,steel usually wins.

chooyuhudson · Post by **chooyuhudson** » Mon Feb 14, 2011 3:57 pm

Thats great Ady, yes I had read about the ally head etc. Will spray some WD40 in and leave overnight. All the best David

V6 Removing Spark Plugs

V6 Removing Spark Plugs

Re: V6 Removing Spark Plugs

Re: V6 Removing Spark Plugs

Re: V6 Removing Spark Plugs

Re: V6 Removing Spark Plugs