elevating roof

Technical questions and answers about the Mazda Bongo

Moderators: Doone, westonwarrior

Post Reply
Bongo Burty
Apprentice Bongonaut
Posts: 9
Joined: Mon Mar 27, 2023 2:29 pm

elevating roof

Post by Bongo Burty » Wed Apr 12, 2023 2:24 pm

Hello Bongies. newish owner, yet to go 'for real' I have a 'push up' roof with straps, not too difficult to push up, but for a OAP, hard to pull down. are the telescopic support struts meant to be 'stiff'? can I shove some oil down them? or is that just how it is??
Regards to all. Bongo Burty
User avatar
g8dhe
Supreme Being
Posts: 10226
Joined: Sun Apr 13, 2008 10:06 pm
Location: Worthing, West Sussex.
Contact:

Re: elevating roof

Post by g8dhe » Wed Apr 12, 2023 3:10 pm

Welcome aboard.
Is the roof a mushroom style opens from the side along the length of the van ? Or is it hinged along the front/rear ?
The mushroom roofs are known to be quite difficult to lower down.
Geoff
2001 Aero V6, AFT, full side conversion.
Image Spherical Visions
Bongo Burty
Apprentice Bongonaut
Posts: 9
Joined: Mon Mar 27, 2023 2:29 pm

Re: elevating roof

Post by Bongo Burty » Fri Apr 14, 2023 10:10 am

Hello Geoff, hinges from the back, relatively easy to push up, hard to pull down.
George
User avatar
g8dhe
Supreme Being
Posts: 10226
Joined: Sun Apr 13, 2008 10:06 pm
Location: Worthing, West Sussex.
Contact:

Re: elevating roof

Post by g8dhe » Fri Apr 14, 2023 10:13 am

Right not sure which make that is, the gas struts normally only need a clean / polish of the ram section as they have there own lubrication internally.
Geoff
2001 Aero V6, AFT, full side conversion.
Image Spherical Visions
Bongo Burty
Apprentice Bongonaut
Posts: 9
Joined: Mon Mar 27, 2023 2:29 pm

Re: elevating roof

Post by Bongo Burty » Mon Apr 17, 2023 9:57 am

Thanks for that Geoff
Post Reply

Return to “Techie Stuff”