Hi All,
After a bit of help please.
I am about to change my front crossmember.
There is a bolt at each end that bolts through the bottom towing eye bracket. Its a 14mm head but what thread does it use as mine is no good and I will need to replace it.
Looks like an M10 but that size bolt just seizes in the hole and I don’t want to strip anything.
Any advice would be welcomed.
Thank you.
Wayne.
What is the thread size that holds the front crossmember to towing eye bracket
Moderators: Doone, westonwarrior
-
- Apprentice Bongonaut
- Posts: 8
- Joined: Thu Jun 09, 2022 8:03 pm
- g8dhe
- Supreme Being
- Posts: 10226
- Joined: Sun Apr 13, 2008 10:06 pm
- Location: Worthing, West Sussex.
- Contact:
Re: What is the thread size that holds the front crossmember to towing eye bracket
Are they not the tie-down hooks ? 53-395A/Y https://www.lushprojects.com/bongoparts ... mgno=.html
If so try googling the bolt number sometimes the adverts show the plastic bag with the bolt sizes on! https://www.google.co.uk/search?num=100 ... =997561025
If so try googling the bolt number sometimes the adverts show the plastic bag with the bolt sizes on! https://www.google.co.uk/search?num=100 ... =997561025
-
- Apprentice Bongonaut
- Posts: 8
- Joined: Thu Jun 09, 2022 8:03 pm
Re: What is the thread size that holds the front crossmember to towing eye bracket
Thank you. I’ll give that a go.