AFT Light stopped working

Technical questions and answers about the Mazda Bongo

Moderators: Doone, westonwarrior

Post Reply
Jiujitero
Junior Bongonaut
Posts: 11
Joined: Sat Sep 26, 2020 2:55 pm

AFT Light stopped working

Post by Jiujitero » Sat Aug 12, 2023 2:29 pm

Hello,

Requesting advise and help on my AFT light that stopped working. \
I changed the light bulb (and checked for continuity and is OK). I was unable to get continuity from the switch. Leisure battery is new and has power. Checked the switch which cuts out the supply when the roof is closed (I am assuming that there is only one, in the attached picture) and seems to be working properly.

Assuming the next best step is the fuse? but as this is the only light not working inside, i would think is unlikely that there is a fuse just for that light. Can someone please share what fuse i should be looking for and if I am in the correct trouble shooting sequence?

Thank you!
Attachments
IMG_9710.jpg
User avatar
g8dhe
Supreme Being
Posts: 10226
Joined: Sun Apr 13, 2008 10:06 pm
Location: Worthing, West Sussex.
Contact:

Re: AFT Light stopped working

Post by g8dhe » Sat Aug 12, 2023 2:39 pm

The circuit is below, basically from the unswitched circuit (10 Amp fuse top left internal fuse box) it goes to the lamp then via one of the roof switches to ground when the roof is raised, when lowered the earth is removed and signals the computer that that side of roof is locked down.
AFT-1.jpg
Geoff
2001 Aero V6, AFT, full side conversion.
Image Spherical Visions
Post Reply

Return to “Techie Stuff”