2.5td engine out
Moderators: Doone, westonwarrior
Re: 2.5td engine out
You can cause problems sometimes if you try hooking gearbox onto torque converter when you put the engine & gearbox back together it’s safer to have converter in proper place located in gearbox first
-
- Junior Bongonaut
- Posts: 24
- Joined: Fri Nov 02, 2018 3:23 pm
Re: 2.5td engine out
Hi guys for some reason I cannot create my own post, but my question is regarding the starter motor bolts. Does anyone know what size they are to replace. 2 of mine are in fine but the 3rd one is 3/4 in with cross thread I believe, but it is connected and really firm. Would this be an issue for my mot this week or not!?
Thanks
Thanks
Muff Tha Bongo Boi
- g8dhe
- Supreme Being
- Posts: 10242
- Joined: Sun Apr 13, 2008 10:06 pm
- Location: Worthing, West Sussex.
- Contact:
Re: 2.5td engine out
Provided the starter motor can start the engine, and is not physically loose or causing problems then I can't think that they will be testing the starter motor directly at all.