Page 2 of 2
Re: Cant find the problem....pls help !!!
Posted: Tue Feb 23, 2010 2:36 pm
by widdowson2008
Could it be one of these pulleys you are looking at?
Re: Cant find the problem....pls help !!!
Posted: Tue Feb 23, 2010 2:38 pm
by widdowson2008
FREDA MIND wrote:hi guys, interesting thread,,, ive got to change the water pump in next few days, how tight do the aux drive belts need to be???
cheers ricky
This any good?
Re: Cant find the problem....pls help !!!
Posted: Tue Feb 23, 2010 9:31 pm
by dandywarhol
the guvnor wrote:I have investigated more in daylight lol...........hope you slept widdowson
ok so i was sort of correct in what i remembered
the 'loose' pulley i refer to sits directly behind the crank pully ! this is were the drive belts sit, it is seperate to were the belt for the air con sits and it does not obviosly move wen the belts are on because of the pressure but with no belts it seems to slide freely from side to side. after looking more closely and adjusting/ loosening a few belts i may have cured the main noise
will now more when i start her from cold (sounded like a bag of bolts this morning !!!!) but i still have a sound that i hope resembles tappits. Looks like it could be the next job on the list !
Still not sure if the said pully is meant to be like it is though !!!!!!!
Sounds like the crank pulley is broken
Is it item 11-371?
http://www.lushprojects.com/bongopartsm ... mgno=.html
Re: Cant find the problem....pls help !!!
Posted: Tue Feb 23, 2010 11:19 pm
by FREDA MIND
widdowson2008 wrote:FREDA MIND wrote:hi guys, interesting thread,,, ive got to change the water pump in next few days, how tight do the aux drive belts need to be???
cheers ricky
This any good?
thanks widdowson thats just what i was looking for , thankyou v much
hope you solve your problems.
ricky
Re: Cant find the problem....pls help !!!
Posted: Wed Feb 24, 2010 12:24 pm
by rita
dandywarhol wrote:the guvnor wrote:I have investigated more in daylight lol...........hope you slept widdowson
ok so i was sort of correct in what i remembered
the 'loose' pulley i refer to sits directly behind the crank pully ! this is were the drive belts sit, it is seperate to were the belt for the air con sits and it does not obviosly move wen the belts are on because of the pressure but with no belts it seems to slide freely from side to side. after looking more closely and adjusting/ loosening a few belts i may have cured the main noise
will now more when i start her from cold (sounded like a bag of bolts this morning !!!!) but i still have a sound that i hope resembles tappits. Looks like it could be the next job on the list !
Still not sure if the said pully is meant to be like it is though !!!!!!!
Sounds like the crank pulley is broken
Is it item 11-371?
http://www.lushprojects.com/bongopartsm ... mgno=.html
I would agree with Dandy,could be the Harmonic Damper has parted company.
Re: Cant find the problem....pls help !!!
Posted: Wed Feb 24, 2010 8:31 pm
by the guvnor
dandywarhol wrote:the guvnor wrote:I have investigated more in daylight lol...........hope you slept widdowson
ok so i was sort of correct in what i remembered
the 'loose' pulley i refer to sits directly behind the crank pully ! this is were the drive belts sit, it is seperate to were the belt for the air con sits and it does not obviosly move wen the belts are on because of the pressure but with no belts it seems to slide freely from side to side. after looking more closely and adjusting/ loosening a few belts i may have cured the main noise
will now more when i start her from cold (sounded like a bag of bolts this morning !!!!) but i still have a sound that i hope resembles tappits. Looks like it could be the next job on the list !
Still not sure if the said pully is meant to be like it is though !!!!!!!
Sounds like the crank pulley is broken
Is it item 11-371?
http://www.lushprojects.com/bongopartsm ... mgno=.html
11-371 is the pulley, looking at the pic...........it does look broken
Re: Cant find the problem....pls help !!!
Posted: Wed Feb 24, 2010 11:39 pm
by widdowson2008
Looks like dandywarhol is right - Crankshaft pulley item 11-371
If you do have to replace this, I would suggest you get the key as well 11-301J.
If the pulley has broken and been wobbling loose on the shaft, the key will very likely be damaged.
Re: Cant find the problem....pls help !!!
Posted: Thu Feb 25, 2010 2:33 pm
by the guvnor
I am booked in at AL motors on monday. Have spoke to the guys and they have said they will look at it but chances are it is the damper betweeen the two pulleys !! They will look at at to confirm.
Thanks for all your help guys, a strange outcome, but another thread that may help another bongo !
Well done everyone and thankyou again