Rust - what do you make of this?

Technical questions and answers about the Mazda Bongo

Moderators: Doone, westonwarrior

User avatar
Gripped
Bongolier
Posts: 442
Joined: Sun Oct 04, 2009 7:38 pm
Location: S. Wales

Re: Rust - what do you make of this?

Post by Gripped » Wed Jun 30, 2010 7:06 pm

dandemann8 wrote:The rust dosn't look to bad and with the right attention can be sorted but I think at £5800 it's overpriced but that's only my opinion :D
I've seen a fair few 10+ year old Bongos for sale with rusty arches, I thought it was pretty much the norm! Some dealers are selling for £11k for converted ones on a P/R plate.

Ours has got the start of it, but the rest of the van is in pretty good nick for it's age.
vanvliet
Supreme Being
Posts: 2081
Joined: Tue Aug 09, 2005 6:33 pm
Location: Fife , Scotland

Re: Rust - what do you make of this?

Post by vanvliet » Wed Jun 30, 2010 11:10 pm

Sometimes a mans gotta - -
- following my previous post I had a closer look at my smartypants waxoyed arches and there are a couple of brown spots appearing :oops: Looks like external paint penetration rather than rusting from underneath

The only way I ever got rid of rust on cars / bikes was to either cut out the rusted area to good metal and / or sand - beadblast to bite into the metal and remove the lot -often leaving little metal! Anything else just held back the rot. Most garages wanting to shift cars simply cover up the problem for a few months by which time any 'gtees' are void
Origo bio stove - no Bongo!
Sharkojoints
Bongonaut
Posts: 61
Joined: Mon Jun 28, 2010 7:58 pm
Location: Stroud

Re: Rust - what do you make of this?

Post by Sharkojoints » Sat Jul 03, 2010 6:10 pm

Well, today's delight was not only rusty but accident damaged.

A fine spattering of rust inside the o/s arch, as well as plenty of brown in evidence underneath. N/s arch had plenty of evidence of fresh paint and filler - owner eventually admitted he had hit a bollard a couple of months ago. Impossible to tell what had been covered up by the filler and seam sealer.

The vertical seam halfway along the n/s sill was rusty too, with a scab of paint / filler flaking off and evidence of a smear of filler along the seam on the underside of the sill.

This isn't the norm, is it? This one was unconverted and up at £4200 - am I being unrealistic?
Post Reply

Return to “Techie Stuff”