Page 2 of 4
Re: Bleeding a Mazda Bongo Ford Freda Video
Posted: Mon Jul 19, 2010 1:56 am
by MountainGoat
I've gotta complain Chell, no subtitles for me.
Oh! well I can always get Ady to do the job for me.
Great film though.
Tony
Re: Bleeding a Mazda Bongo Ford Freda Video
Posted: Mon Jul 19, 2010 8:03 am
by Ian
We also need a braille version.....
Re: Bleeding a Mazda Bongo Ford Freda Video
Posted: Mon Jul 19, 2010 8:29 am
by munroman
Ian wrote:We also need a braille version.....
That's a touching thought...................
Re: Bleeding a Mazda Bongo Ford Freda Video
Posted: Mon Jul 19, 2010 11:44 am
by bongobaz
Grand job
Re: Bleeding a Mazda Bongo Ford Freda Video
Posted: Mon Jul 19, 2010 2:08 pm
by Northern Bongolow
sorry tony you do raise a very valid point,i dont know how far chell can go with that idea,but she will see what can be done.
i think the easy answer would be to do a bleed together sometime,but that wont help others.
to many things flashing up on the screen can be very distracting.steve widdowson is currently working on some graphics of the system state,at certain times of the bleed,these may help you .
regards ady.
Re: Bleeding a Mazda Bongo Ford Freda Video
Posted: Mon Jul 19, 2010 5:37 pm
by waycar8
Well done all invovled
great explanation and vid
Re: Bleeding a Mazda Bongo Ford Freda Video
Posted: Tue Jul 20, 2010 12:27 am
by brorabongo
MountainGoat wrote:I've gotta complain Chell, no subtitles for me.
Oh! well I can always get Ady to do the job for me.
Great film though.
Tony
Subtitles would be handy for me aswell....... I can't understand those accents!!!
Well done all involved.
Re: Bleeding a Mazda Bongo Ford Freda Video
Posted: Tue Jul 20, 2010 9:15 am
by jaylee
Qualiteeeeeee!!
Re: Bleeding a Mazda Bongo Ford Freda Video
Posted: Wed Jul 21, 2010 7:24 am
by wonkanoby
out of interest were did you get that bucket sized funnel from
as its not as easy as you show with the much smaller regular one i have that will fit in the pipe
Re: Bleeding a Mazda Bongo Ford Freda Video
Posted: Wed Jul 21, 2010 8:49 am
by haydn callow
You need a funnel that the pipe will fit "up into" (explained in vidio by Kirsty)
Not funnel into pipe.
You can get them anywhere.
The funnel in the vidio has been modifyed.
Re: Bleeding a Mazda Bongo Ford Freda Video
Posted: Wed Jul 21, 2010 2:36 pm
by missfixit70
wonkanoby wrote:out of interest were did you get that bucket sized funnel from
as its not as easy as you show with the much smaller regular one i have that will fit in the pipe
Can't remember where I got my big funnel, but It's a nightmare trying to bleed it with a little one, the bigger the better. As Haydn said carefully trim it so the bleed hose fits tightly inside, or use an air hose type connector (as is on the video) or similar to make it fit.
Re: Bleeding a Mazda Bongo Ford Freda Video
Posted: Thu Jul 22, 2010 6:54 pm
by missfixit70
Big funnels (18cm) in Wilkinsons for 69p (I think) I got 2 today ( I can never find them when I need).
Re: Bleeding a Mazda Bongo Ford Freda Video
Posted: Thu Jul 22, 2010 8:24 pm
by Triple/R
missfixit70 wrote:Big funnels (18cm) in Wilkinsons for 69p (I think) I got 2 today ( I can never find them when I need).
Your quite lucky~i've been to all our local stores but can't find any as big as them on video.
Re: Bleeding a Mazda Bongo Ford Freda Video
Posted: Thu Jul 22, 2010 8:37 pm
by missfixit70
Maybe I shoulda bought a load of them & stuck em on ebay "Officially ratified bongo bleeding funnels" could be worth a fortune
Re: Bleeding a Mazda Bongo Ford Freda Video
Posted: Thu Jul 22, 2010 9:08 pm
by maxheadroom