Bongo Fury

Got to admit... I used Flossies idea... Till the battery went down on the key chain/fob.... Too much use back stage at gigs!!

This is the sort of thing i'm looking for,but too big~i measured one yesterday on a T reg & it was apprx; 15mm~but don't know the total length of it, but must be quite dumpy to fit.

http://cgi.ebay.co.uk/ws/eBayISAPI.dll? ... K:MEWAX:IT

If you take the top off the cowl..? not a lot of space there!

You may well get away with that, hard to tell. (reference to link) If you solder wires to the connections on the unit, & make connections for prospective bottom cowl removal, somewhere down the loom!??

Its a bit fiddly, i just pull the bulb out of mine if i have remove the bottom cowl....

Yes Jaylee~can see what you mean~the diameter of the one in the link is 22mm,will see if i can buy one at around 15mm.

Bulwell Bongoleers wrote:Ray.
I've got a light phobe thingy on my matiz keys as i struggle to see where to put the key too. It seems to do the job and it only cost a few quid.

Thanks Manda ~seems like it's going to be something simple eventually.

Done it ~i fixed a LED light in the courtesy light last week but missus was still struggling to find the ignition keyhole (she's old bless her) so bought this light & fixed it next to ignition key~she's happy with the result









Looking at the pics~it seems bright enough without ignition light,but took photo with bedroom lights on which were shining into the Bongo.

Hi Ray,

Nice Pimp my friend, a great idea, looks very neat, You spoil Christine you do

See you soon hopefully

Paul.

BONGODADDY wrote:Hi Ray,

Nice Pimp my friend, a great idea, looks very neat, You spoil Christine you do

See you soon hopefully

Paul.

Nice to hear from you Paul ~you know what she's like ~but i don't mind cus that's the sort of bloke i am

She's a very lucky lady

Might have the Bongo back by xmas so i am a bit lost without her

Nice one! Tidy job too... Was it from the link you posted earlier..?

BONGODADDY wrote:She's a very lucky lady

Might have the Bongo back by xmas so i am a bit lost without her

Hey up Paul, whats up with yer waggon??

jaylee wrote:

Nice one! Tidy job too... Was it from the link you posted earlier..?

Cheers Jaylee ~i found this one on ebay~it was a bit too long & had to bend contacts downwards but managed to get the spade connectors on~a bit fiddly but end result's not bad~thanks for your earlier help anyway.

http://cgi.ebay.co.uk/ws/eBayISAPI.dll? ... K:MEWAX:IT

Hiya Jay,


How are you matey?
She is in for TLC on the bodywork area, also having spats painted and fitted etc etc etc, quite a lot to be done as i want it back to a really good standard, it has been a long wait as the garage are fitting her in around other jobs to keep the costs down for me so i am having to be patient

Would be a great xmas pressie if she is back by then

Paul.

BONGODADDY wrote:Hiya Jay,


How are you matey?
She is in for TLC on the bodywork area, also having spats painted and fitted etc etc etc, quite a lot to be done as i want it back to a really good standard, it has been a long wait as the garage are fitting her in around other jobs to keep the costs down for me so i am having to be patient

Would be a great xmas pressie if she is back by then

Paul.

I'm all good dude!

Just thought after i posted the question you were probably having the paint job... If yer getting it done for a decent price? Then it will be worth the wait!



Look forward to some pics!!