Page 3 of 5
Re: Hello from Tad!
Posted: Mon Mar 22, 2010 12:13 am
by Mountain
Dunno, the gauge can't have been on full for more than a minute or two.
No 'froth' in the oil either.
I might have just got away with it.
-
Getting bled tomorrow that's for sure though!
Re: Hello from Tad!
Posted: Mon Mar 22, 2010 12:24 am
by mikeonb4c
Mountain wrote:Dunno, the gauge can't have been on full for more than a minute or two.
No 'froth' in the oil either.
I might have just got away with it.
-
Getting bled tomorrow that's for sure though!
Fingers crossed for you. You sound like you know your motors OK, even if some garage didn't. An error like that is not something I would have instinctively thought to go looking for when I'd just bought a roadworthy car. And you couldn't realistically have fitted a low coolant alarm before you even know there was one for the Bongo.
Good luck and keep us posted

Re: Hello from Tad!
Posted: Mon Mar 22, 2010 12:41 am
by Mountain

Fingers crossed
My father's a mechanic, I was raised in a garage

Re: Hello from Tad!
Posted: Mon Mar 22, 2010 6:51 pm
by Mountain
Er...anyone got a picture of this mysterious bleed pipe?
I've spent about half an hour trawling the forum to no avail.
-
Is this the pipe next to the oil filler cap?
Re: Hello from Tad!
Posted: Mon Mar 22, 2010 7:43 pm
by missfixit70
It's the long one that should come out of the 4 way connector with a plug in the end going over the alternator & clipped under the nearside of the passy seat, should be the only one that goes nowhere,15-381A on here, top right -
http://www.lushprojects.com/bongopartsm ... mgno=.html
Re: Hello from Tad!
Posted: Mon Mar 22, 2010 7:52 pm
by Mountain
yep...it's not very long though. Been blanked off. I'll put some pics up in a bit

Re: Hello from Tad!
Posted: Mon Mar 22, 2010 8:04 pm
by missfixit70
Get a new one then you need the length to bleed properly.
Re: Hello from Tad!
Posted: Mon Mar 22, 2010 8:38 pm
by Mountain
OK,
Pipe about 3ft long after all & blanked off with this above the turbo.
Sorry image too big, taken in the dark with broken camera phone....sat on it and cracked the screen at weekend!!
Re: Hello from Tad!
Posted: Mon Mar 22, 2010 8:40 pm
by Mountain
I am now following bleed procedure with funnel.
Biggest funnel I have!
A few bubbles out to start with, but heaters still cold.
BTW missfixit70, cheers for all your help

Re: Hello from Tad!
Posted: Mon Mar 29, 2010 10:15 pm
by dreamwarrioruk
how you doing with your bongo mountain,got it sorted
Re: Hello from Tad!
Posted: Mon Mar 29, 2010 10:18 pm
by missfixit70
Re: Hello from Tad!
Posted: Tue Mar 30, 2010 5:51 pm
by Mountain
dreamwarrioruk wrote:how you doing with your bongo mountain,got it sorted
Looks like the head gasket had gone with the first boil.....oh well

Re: Hello from Tad!
Posted: Tue Mar 30, 2010 5:55 pm
by dreamwarrioruk
lucky if its just the gasket
Re: Hello from Tad!
Posted: Tue Mar 30, 2010 5:55 pm
by tay
hope you get youre' head sorted out cos'that bongo looks proper bo i tell thee!
Re: Hello from Tad!
Posted: Tue Mar 30, 2010 6:59 pm
by Mountain
tay wrote:hope you get youre' head sorted out cos'that bongo looks proper bo i tell thee!
Wish I'd known about the world's worst cooling system before buying one though.
lucky if its just the gasket
Don't tell me....a Bongo overheats just the once and the head explodes, the auto free top is sent into orbit and the wheels fall off?
The head is in being skimmed and leak tested today so I will prepare myself for the worst.