Page 4 of 4
Re: ATF change
Posted: Thu Sep 15, 2011 6:05 pm
by mikeWalsall
The original poster mentioned that he used a 10mm socket in a cordless driver (which are usually 1/4" square drive) ..
.... "Dropped the sump (10mm head in a cordless driver" ........
Re: ATF change
Posted: Thu Sep 15, 2011 11:48 pm
by missfixit70
mikeWalsall wrote:The original poster mentioned that he used a 10mm socket in a cordless driver (which are usually 1/4" square drive) ..
.... "Dropped the sump (10mm head in a cordless driver" ........
Yes
SHE did
Re: ATF change
Posted: Fri Sep 16, 2011 12:03 am
by The Great Pretender
missfixit70 wrote:mikeWalsall wrote:The original poster mentioned that he used a 10mm socket in a cordless driver (which are usually 1/4" square drive) ..
.... "Dropped the sump (10mm head in a cordless driver" ........
Yes
SHE did
I hope an apology is on the way.
Re: ATF change
Posted: Fri Sep 16, 2011 12:14 am
by mikeWalsall
OOppps sorry ...
I can assure you I am not sexist..