Page 5 of 5
Re: silicone hose leaks, turbo clamp, & thermostat problems
Posted: Wed Jul 28, 2010 7:21 am
by Ron Miel
I bought 8 Murray Constant Tension Clamps from there - expensive, and just before Haydn came up with his offer to source similar but cheaper from Oz
Bongo's in for annual service/MOT, including main hoses change to silicone using the Murrays, as I write, so I'll let peeps know how they perform - have provided the garage with Murray's torque spec., so hopefully if complied with, they'll work OK. If not, then at least there's another bottle of Haydn's UV leak tracer dye going in with the new coolant
Re: silicone hose leaks, turbo clamp, & thermostat problems
Posted: Sat Jul 31, 2010 10:13 pm
by Ron Miel
Ron Miel wrote:
>
>
Bongo's in for annual service/MOT, including main hoses change to silicone using the Murrays, as I write, so I'll let peeps know how they perform...
>
>
Initial favourable report embedded here
http://www.igmaynard.co.uk/bongo/forum/ ... 97#p434819
Re: silicone hose leaks, turbo clamp, & thermostat problems
Posted: Sun Aug 01, 2010 1:37 am
by Ron Miel
Ron Miel wrote:Ron Miel wrote:
>
>
Bongo's in for annual service/MOT, including main hoses change to silicone using the Murrays, as I write, so I'll let peeps know how they perform...
>
>
Initial favourable* report embedded here
http://www.igmaynard.co.uk/bongo/forum/ ... 97#p434819
If there's any change to that with time, then of course I'll post.