Bongo Fury

I have finely got around to replacing the o rings on the sides of the fuel pump but my pump is still leaking . it seams to be leaking from the back where the injectors come out the back do you now if there are any gaskets around this area that are likely to leak .
Thanks
Phil

Have a look here:-

http://www.lushprojects.com\bongoparts\pages\1362A Fuel pump (Diesel).html

copy and passte it into your browser as it will not work if you click on it from here!

Hi
I’ve been studying some diagrams of the fuel pump (thanks Vanmanerik)and think I’ve found a o ring I didn’t no existed. The screw that adjusts the pump screws into a plug if you remove the plug the it looks like there is an o ring fitted under it. Has any one removed this plug? Hopefully the link below show the part I’m talking about.
http://www.vepump.cn/English/Plug.htm
Thanks
Phil

Are we talking about part no 12 or 13 here?
I thought no 13 was the fuel supply adjustment that controls the maximum amount of fuel to be injected thus controlling the power output although I have never attempted to adjust my motor as it runs so well and I get around 30mpg out of it .

Hi
It’s part no12, I’v got it booked in with a diesel specialist tomorrow this could be expensive