Bongo Fury

hi , iv been having intermitant problems with my gearbox going into hold mode ie locked in a high gear this is rectefied by turning the ignition off and restarting then all is well again for a while , iv had the car pluged in to a fault reader but there was nothing , it has been sugested that the speedo chip can sometimes cause problems so i have decided to remove the chip for a while to see what happens , i have removed the chip but the speedo is not working at all now altho the van drives fine, is there something i should have refited when i removed the chip ?

a wire is cut for instation of the chip that needs reconnecting

It may sound daft but have you made sure that all the original wires have been properly rejoined to each other to make the circuit. I ask this as the wiring is thin to start with.

weston you are correct i have not reconected the kmh signal input wire , that might help
thanks

glad I could help

Mine should have said instalation and thats probably still wrong