Bongo Fury

Hi everyone iv looked everywhere on here for info on reversing middle seats. i can find loads on seats with short runners but none with long runners can anyone help cheers.

Basically the same? FAQ here - http://www.igmaynard.co.uk/bongo/forum/ ... =43&t=9562 I used the modified runners on long rails then they can go either way.

Easy with the long rails, providing you dont have a rear kitchen fitted. I just removed the rear stops, lifted the carpet slightly and slid both pairs of seat runners out of the rear of the van (you might just have to cut some of the floor foam to allow them out). You can then reverse and refit the runners for the first seat (reversed) and re-fit the second seat runners. Not as hard as it sounds and didnt take long.

Tim

cheers tim will have ago at weekend