Page 1 of 1

Ladder Fitting

Posted: Mon Sep 06, 2010 10:15 pm
by soulcake
Please advise how to remove back handle ???? so that ladder may be fitted.

Sorry if I am asking in the wrong place but I have looked all over and not seen the word 'ladder'.

Catharine Soulcake

Re: Ladder Fitting

Posted: Tue Sep 07, 2010 3:11 am
by Northern Bongolow
if you look at the handle it has 4 plastic covers,one in each corner,get a small screwdiver or similar and GENTLEY try to lift one edge of each one,be careful because one side is attatched to the handle it pivots,the other opposite edge lifts to show the bolts,
keep the handle safe as they are quite expensive,if you need to refit it later.

Re: Ladder Fitting

Posted: Tue Sep 07, 2010 8:26 am
by A1tony
Sorry for the hijack, but where can you get the ladder and do they fit on a facelift tailgate?? Also what sort of price, thanks...