Bongo Fury

being a super bright spark!!!!!
I was reversing out of a car park, (thankgoodness i had discovered before it was to late had an overhead height bar!) and a very overgrown civil gentleman (fat chav) was beeping at me and saying some not so pleasant english words at me, for me to only discover that i did in fact only have one break light and one reverse light working! well of course i did try to apologise but to no avail he continued to speak in said words.
My question is how many lights should be on etc when i do a light check???

All lights should be available to do their jobs. If you have a side light out at night or one of your brake lights is out at any time the police have a reason to stop you then put you through the mill looking for other faults.

Tony

bongo-babe wrote:being a super bright spark!!!!!
I was reversing out of a car park, (thankgoodness i had discovered before it was to late had an overhead height bar!) and a very overgrown civil gentleman (fat chav) was beeping at me and saying some not so pleasant english words at me, for me to only discover that i did in fact only have one break light and one reverse light working! well of course i did try to apologise but to no avail he continued to speak in said words.
My question is how many lights should be on etc when i do a light check???

Hi bongo-babe,

Your reversing lights dont need to be working,some cars dont have them and some only have One.
As Tony has said the rest need to be working.
Cheers..

rita wrote:

bongo-babe wrote:being a super bright spark!!!!!
I was reversing out of a car park, (thankgoodness i had discovered before it was to late had an overhead height bar!) and a very overgrown civil gentleman (fat chav) was beeping at me and saying some not so pleasant english words at me, for me to only discover that i did in fact only have one break light and one reverse light working! well of course i did try to apologise but to no avail he continued to speak in said words.
My question is how many lights should be on etc when i do a light check???

Hi bongo-babe,

Your reversing lights dont need to be working,some cars dont have them and some only have One.
As Tony has said the rest need to be working.
Cheers..

how do i know how many etc. i thought as there were 2 reverse lenses then there would be two reverse lights and the same with the brakes?

Two brake lights (3 if you've got a rear spoiler), 2 side lights, 2 reversing lights. Mine only has a nearside reversing light, as I converted the offside one to a rear fog lamp.

francophile1947 wrote:Two brake lights (3 if you've got a rear spoiler), 2 side lights, 2 reversing lights. Mine only has a nearside reversing light, as I converted the offside one to a rear fog lamp.

thanks.
But these are not all working and late last year i had a prob where the tail lights fuse blew out whilst driving home in the dark. i did (god knows how) manage to change the fuses. Now my next question is being a bit of a fluffy girlie girl and have no idea what im doing and as my dad says "get a grown up to do it"! do you think i should change the fuses in the brake and reverse lights? or is it a bulb? as one reverse and one brake is still working? i am wondering if each light has its own fuses or if it is indeed the bulbs or combo of both> (sorry just read this through and now seems really complicated.

Probably just the bulbs, unless any of the front lights aren't working as well - each bulb is not fused separately.

francophile1947 wrote:Probably just the bulbs, unless any of the front lights aren't working as well - each bulb is not fused separately.

thank you so much. do i take it to a shop like halfords to change these? if not do i buy a pack of bulbs from the garage like i did with the fuses or our they special type ones.?
my next job is to go onto a special ladies mechanics course to try to learn the bascis i think?

It's an easy job to replace the rear bulbs If you lift the tailgate, you'll see a couple of screws on each lamp - just undo these and slide the unit towards the outer edge of the car (you may need to hit it with your hand). Sorry, I can't remember if the tail and brake lights are combined bulbs or separate and, as it's pisitivly possing it down at the moment, I'm not going out to look

you can buy the bulbs any were a local garage should have both

open the tail gate

remove the 2 screws from the light fitting.....x head philips driver

the light unit needs to slide out wards of its 2 clips,might need a wack

dont pull it backwards just to the side or you will break something

now you can remove and replace the bulbs

you will need one for reverse light

and a combined stop and tail

try and make it to the big bash ,then enrole on one of haydns super courses for the new bongo owner,you may learn a lot.

http://cgi.ebay.co.uk/BOX-10-INDICATOR- ... 1c06108ee3

http://cgi.ebay.co.uk/CAR-BULB-380-STOP ... 1c0dac5ba6

will get you pictures

francophile1947 wrote:It's an easy job to replace the rear bulbs If you lift the tailgate, you'll see a couple of screws on each lamp - just undo these and slide the unit towards the outer edge of the car (you may need to hit it with your hand). Sorry, I can't remember if the tail and brake lights are combined bulbs or separate and, as it's pisitivly possing it down at the moment, I'm not going out to look

thanks for your help.

wonkanoby wrote:you can buy the bulbs any were a local garage should have both

open the tail gate

remove the 2 screws from the light fitting.....x head philips driver

the light unit needs to slide out wards of its 2 clips,might need a wack

dont pull it backwards just to the side or you will break something

now you can remove and replace the bulbs

you will need one for reverse light

and a combined stop and tail

thanks for your help.

Northern Bongolow wrote:try and make it to the big bash ,then enrole on one of haydns super courses for the new bongo owner,you may learn a lot.

think that sounds like a good idea. thankyou.