Bongo Fury

Posted: **Tue Feb 22, 2011 3:12 pm**

OK so some progress from last post made thanks everyone, got the wiring diagrams, dead easy to make a new loom.

Taking the old loom out - the loom itself dissapears into the frame of the Bongo and goes in the direction of the dashboard with 2 small white connectors (X 14 and X 15), but I cannot for the life of me find then under the dash to disconnect them.

HEYELP

Posted: **Tue Feb 22, 2011 3:33 pm**

they are definitley there, think you'll find they're actuall in the door pillar and you need to pull the kick panel and the relays out of the way to get to them.
julian

Posted: **Tue Feb 22, 2011 5:21 pm**

See my second post down with the link in it??? http://www.igmaynard.co.uk/bongo/forum/ ... =3&t=47069

If you got the loom free from the door hinge clip, & give it a jiggle through the cowl/grommet in the body you will see the corresponding bunch o wires & connector move!!

Posted: **Tue Feb 22, 2011 8:39 pm**

This is gonna be handy folks, I have a new loom to fit, when I get my bongo back from heart surgery, lol.

Bongo Fury

Drivers door wiring loom plugs in where ?

Drivers door wiring loom plugs in where ?

Re: Drivers door wiring loom plugs in where ?

Re: Drivers door wiring loom plugs in where ?

Re: Drivers door wiring loom plugs in where ?