Bongo Fury

Hello everyone, I'm new to the site and need help. I think that's I've snapped my rear Anti-roll Bar but have limtied to no knowladge regarding this. I have a taken a pic if anyone could confirm or un confirm what I've done and give me an idea of the price I'm looking at I'd be extreamly happy. Thanks

Kris

Pic not showing

Sorry Guys how do I up load a pic?

follow the instructions here http://www.igmaynard.co.uk/bongo/forum/ ... =42&t=9285

or if you can uplaod it to a web package just put the link or if all that fails shout and I will pm my e-mail and you can send it me and I will post it

also where abouts are you as local knowledge may help any advice

Ok I can't figure it out. Basically it looks like a pipe behind the rear wheels, it looks like it's severed and I'm guessing it's the rear anti roll bar. Wish I could show the picture! If it is could anyone tell me how much is new one roughly??

OK here is the pic


Itsnot the anti roll bar that sits just in front of the rear axel

The bar to the rear of the diff is the Lateral rod....

The bottom of the shock absorber doesn't look as if it's attached to anything

It may be but in lush projects it looks like its attached to the axel in the photo it doesn't

http://www.lushprojects.com/bongopartsm ... 1of02.html

I think your right John that does not look good

This is what it does scroll down and play the flash animation

The broken bit is the "Panhard Rod" which is there to stop the rear axles swing from side to side on corners.

http://en.wikipedia.org/wiki/Panhard_rod

And yes it doesn't look like the nearside shocker is attached as it should be either.

What on earth did you hit?

Some photos......




Nearside -


Offside -

Nope not my Bongo

Also..... Part No S10H28650 Lateral Rod......

I guess one the usual Bongo specialists may have a r=good s/h rod, but before you sort one, I would find out what caused the fracture/bend and if indeed it's connected as per the above photos....

Like you Kris, i have a limited knowledge of these matters... But like Scanner am quite interested how this damage came about..?



I'm looking at this picture & also thinking possible damage to any bearings..? & could that be brake fluid on the inner wheel rim?? Techies knock me back if i appear to be wrong, I'd check the tire walls too!??? Cant be too careful...

I can probably get you a panhard bar off the Bongo I'm breaking if you want...