caps tested at the bash
Posted: Wed May 11, 2011 2:01 am
thanks to haydn for the parts, ive made a little gadget that can test the operation of the expansion cap, both positive pressure test, and the negative pressure test.
i will be testing caps at the bash if anyone is interested, there will be a small nominal charge with ALL proceeds going to charity. if you have got to the bash in one piece yours is probably fine, i was thinking of the spare one in the glove box really. look me or haydn up at the bash if interested.
better put this bit in-----. dont take your cap off your motor if its hot,this could cause serious injury,if in doubt please ask.
i will be testing caps at the bash if anyone is interested, there will be a small nominal charge with ALL proceeds going to charity. if you have got to the bash in one piece yours is probably fine, i was thinking of the spare one in the glove box really. look me or haydn up at the bash if interested.
better put this bit in-----. dont take your cap off your motor if its hot,this could cause serious injury,if in doubt please ask.