Page 1 of 1
Bongo spare wheel winder
Posted: Mon May 23, 2011 8:12 pm
by steve alan
hope there is some tec minded members on here that can help out ,did'nt get a winding pole with my bongo so son,s gonna fab one up for me , not something I can do myself now as recovering from a stroke.
what I would like to know is
1. mesurement from end of main bar to the cross piece?
2. how far cross piece protudes outwards?
finaly how thick is cross piece & how thick is the main bar
thanks in advance
Steven
Re: Bongo spare wheel winder
Posted: Mon May 23, 2011 8:27 pm
by alant54
Do you mean that you haven't got the winding pole for the jack.?..it's located in the storage box in the sliding door footwell in two clips at the top......
it does both the jack and spare wheel winder...
Re: Bongo spare wheel winder
Posted: Mon May 23, 2011 8:28 pm
by missfixit70
Somewhere I'm sure there're drawings to make em up from, but b*ggered if I can find em. Anyone?
Re: Bongo spare wheel winder
Posted: Mon May 23, 2011 8:31 pm
by Northern Bongolow
steve alan wrote:hope there is some tec minded members on here that can help out ,did'nt get a winding pole with my bongo so son,s gonna fab one up for me , not something I can do myself now as recovering from a stroke.
what I would like to know is
1. mesurement from end of main bar to the cross piece?
2. how far cross piece protudes outwards?
finaly how thick is cross piece & how thick is the main bar
thanks in advance
Steven
1 = 5mm.
2 = 10mm long each arm from the outer of the shaft.
each arm is 6mm thick.
main bar is 15mm thick, and total length tip to tip is 750 mm.
Re: Bongo spare wheel winder
Posted: Mon May 23, 2011 8:40 pm
by alant54
Dimensions:- Diameter of pole= 15mm
Overall length= 750mm
Cross piece diameter= 5m
Length = 40mm
Cross piece located at 7.5mm centre from end of winding pole
other end of winding pole has two flats to take the handle for the jack
hope this helps
Oh bugger....Ady got there first...
....must type faster...
....
Alan
Re: Bongo spare wheel winder
Posted: Mon May 23, 2011 9:31 pm
by Northern Bongolow
Re: Bongo spare wheel winder
Posted: Mon May 23, 2011 10:12 pm
by steve alan
Northern Bongolow wrote:steve alan wrote:hope there is some tec minded members on here that can help out ,did'nt get a winding pole with my bongo so son,s gonna fab one up for me , not something I can do myself now as recovering from a stroke.
what I would like to know is
1. mesurement from end of main bar to the cross piece?
2. how far cross piece protudes outwards?
finaly how thick is cross piece & how thick is the main bar
thanks in advance
Steven
1 = 5mm.
2 = 10mm long each arm from the outer of the shaft.
each arm is 6mm thick.
main bar is 15mm thick, and total length tip to tip is 750 mm.
many many thanks
Re: Bongo spare wheel winder
Posted: Mon May 23, 2011 10:13 pm
by steve alan
alant54 wrote:Dimensions:- Diameter of pole= 15mm
Overall length= 750mm
Cross piece diameter= 5m
Length = 40mm
Cross piece located at 7.5mm centre from end of winding pole
other end of winding pole has two flats to take the handle for the jack
hope this helps
Oh bugger....Ady got there first...
....must type faster...
....
Alan
many many thanks
Re: Bongo spare wheel winder
Posted: Mon May 23, 2011 10:36 pm
by daveblueozzie
Dunno if this helps. you can weld a socket on the end if you don't have the ratchet.
Re: Bongo spare wheel winder
Posted: Tue May 24, 2011 12:47 am
by steve alan
daveblueozzie wrote:Dunno if this helps. you can weld a socket on the end if you don't have the ratchet.
brill mesurements in old skool as well just my cup of tea
many thanks
