Page 1 of 1

Help Please

Posted: Thu Jul 28, 2011 8:26 pm
by aitch
Got in the Bongo and the front carpets are soaking wet looks like the front heater matrix has sprung a leak #-o #-o

where can I get one and at what price???

how easy or hard are they to fit???

how do I check this is what is wrong as I don't want to start her up as all the alarms are sounding when I turn her on
I haven't done a search yet as I have been on shift at work for 24 hours and am shattered so cannot look closely until Saturday

any advice or help please :roll: :roll: :roll:

Re: Help Please

Posted: Thu Jul 28, 2011 8:52 pm
by widdowson2008
aitch wrote: Got in the Bongo and the front carpets are soaking wet looks like the front heater matrix has sprung a leak #-o #-o

where can I get one and at what price???

how easy or hard are they to fit???
how do I check this is what is wrong as I don't want to start her up as all the alarms are sounding when I turn her on
I haven't done a search yet as I have been on shift at work for 24 hours and am shattered so cannot look closely until Saturday

any advice or help please :roll: :roll: :roll:
The person to advise you here (on difficulty of removal/refitting) is Helen. She has done this job and will probably come up with some usefull stuff. She may even have some pics if you ask her nicely. :D

Re: Help Please

Posted: Thu Jul 28, 2011 8:57 pm
by missfixit70
These may help Aitch -
http://www.igmaynard.co.uk/bongo/forum/ ... ix#p417957
http://www.igmaynard.co.uk/bongo/forum/ ... atrix+leak
May be easier to bypass it for now, just make sure it's bled properly obviously.

Re: Help Please

Posted: Thu Jul 28, 2011 9:04 pm
by missfixit70
Don't drive it until it's sorted as it's part of the cooling system.
Looks like Bongobits site is down, AVA & Bongo shop not got em listed. Bellhill or Allans may be able to help, or any mazda dealer should be able to get hold of one for you, but it may take a few weeks. You should be able to get one from a breaker, but then it may not last very long if it's already had a hard life.

Re: Help Please

Posted: Thu Jul 28, 2011 9:05 pm
by mister munkey
Poor Aitch. :(

Ady knows about these things too.

Worry not. The Force Is With You.

8)

Re: Help Please

Posted: Thu Jul 28, 2011 9:11 pm
by aitch
thanks for all the help and advice guys and girls I think I had better start saving up!!!!!

Re: Help Please

Posted: Thu Jul 28, 2011 9:12 pm
by teenmal
aitch wrote:thanks for all the help and advice guys and girls I think I had better start saving up!!!!!
Hi aitch,might be worthwhile trying these people.

http://www.vehicleheaters.co.uk/Heater% ... 20852.html

Re: Help Please

Posted: Thu Jul 28, 2011 9:18 pm
by Doone
Allans has got a new one in stock but I know they are not what I would call cheap. I have also just found a used one on ebay, but I have no idea what its like.

http://item.mobileweb.ebay.co.uk/viewit ... 4108402010

Re: Help Please

Posted: Thu Jul 28, 2011 9:51 pm
by haydn callow
If you need any help bleeding it...I am just up the road from your work (assuming you are still at the Elms)

Re: Help Please

Posted: Thu Jul 28, 2011 9:57 pm
by M 80NGO
Where on the rad is the leak ? there are companies that can refirb a rad at a fraction of the cost of a new unit and if you get a length of copper pipe you can use it to bypass the rad whilst its away being refirbed thus enabling you to use the bongo if you need to :wink:

maybe some one like this

http://www.google.co.uk/url?sa=t&source ... Hw-KOkfAMQ