Page 1 of 1
					
				Fitting a low coolent alarm HELP PLEASE
				Posted: Wed Jul 25, 2012 9:20 pm
				by Jimbob738
				Hello all
i have to fit my low coolent alarm before i go away i purchased it along with some hoses on ebay from someone who never got to fit it and i dont have any instructions does anyone have them in PDF format that i could get emailed to me ASAP please?
i really need to fit this for peice of mind and im in the dark with it a little im sure its not rocket science just dont know what wire go where any help would be great.
Regards
Jamie
			 
			
					
				Re: Fitting a low coolent alarm HELP PLEASE
				Posted: Wed Jul 25, 2012 9:39 pm
				by teenmal
				Hi Jamie,
               It depends on the type(manufacturer) of the device.Do you have more details.
Cheers.
			 
			
					
				Re: Fitting a low coolent alarm HELP PLEASE
				Posted: Wed Jul 25, 2012 9:52 pm
				by Jimbob738
				Haydn Callows device this one 
http://www.coolantalarm.co.uk/shop/inde ... roductId=3
Haydn already sent me the instructions once but i saved them to a dodgey harddrive that has died on me contacted him today but unfortunately he isnt able to help right now.
hope you can help me.
 
			 
			
					
				Re: Fitting a low coolent alarm HELP PLEASE
				Posted: Wed Jul 25, 2012 9:59 pm
				by Jimbob738
				i have just looked at that kit on his website and mine and i seem to be missing half of it i.e i have the alarm part with the red wires ut not the other part with just black wires i think i may need to order a new kit boooooo dam ebay!
i will photo what i have maybe i can make up the rest with fresh cable instructions would still be good please if possible.
			 
			
					
				Re: Fitting a low coolent alarm HELP PLEASE
				Posted: Wed Jul 25, 2012 10:06 pm
				by haydn callow
				pm sent
			 
			
					
				Re: Fitting a low coolent alarm HELP PLEASE
				Posted: Wed Jul 25, 2012 10:08 pm
				by haydn callow
				just make up the wire ...about 3 meters long with a male bullet on one end and a 5mm ring terminal on the other
			 
			
					
				Re: Fitting a low coolent alarm HELP PLEASE
				Posted: Wed Jul 25, 2012 10:10 pm
				by haydn callow
				you also need a led bezel and a sticker....also 3mm drill
Just buy a new kit....then send that one back and i will give a "fair" refund when I get back home.
			 
			
					
				Re: Fitting a low coolent alarm HELP PLEASE
				Posted: Wed Jul 25, 2012 10:47 pm
				by Jimbob738
				I have a LED Bezel, I have a Sticker the only parts missing are the 3mm screw and that black cable with the crimped connector on which im sure i can make up i have a whole reel of cable for that job just need instructions on what goes where.
heres what i got:
Ok so all i need to do is make a cable up to go to the coolent tank connect solid red to the ignition live and the red/black to an earth and do all this while the battery disconnected and engines cool and mount my LED and sticker jobs a gooden yeah?
sorry if this was slightly tedious but better to ask than to go screw it up.
Thanks
 
			 
			
					
				Re: Fitting a low coolent alarm HELP PLEASE
				Posted: Wed Jul 25, 2012 11:08 pm
				by Jimbob738
				Thanks Haydn i got an email with my instructions all will be fine from here thanks so much really appriciate it.
Jamie
			 
			
					
				Re: Fitting a low coolent alarm HELP PLEASE
				Posted: Thu Jul 26, 2012 8:52 am
				by haydn callow
				the email was from me via the wifes account
			 
			
					
				Re: Fitting a low coolent alarm HELP PLEASE
				Posted: Thu Jul 26, 2012 2:37 pm
				by Jimbob738
				Star mate thanks!
i will fit tonight and report back when finished shouldnt be too much hassle