Bongo Fury

Anyone made one of these?

I've bought the Kvartal as per the instructions, but this is the wrong stuff for the cab divider it appears.
I can't bend it enough across the horizontal plane.

Anyone recommend a rail that will do the job?

I used an adjustable sprung curtain rod, the sort used for net curtains. It braces across the headlining by the rear heater high level outlets. From it I hung a pair of cheap ready made curtains. The whole thing can be taken out and put across the open tailgate if need be. Total cost about £15. Click picture to view larger picture:

Our method here www.g8dhe.net/bongo_images/curtain

I took mine from a People carrier in the scrap yard, just bent it to fit the roof profile

I used the furniglide runner as suggested but screwed it directly to the roof lining.
Worked a treat well pleased with the results.

Thanks!