Bongo Fury

I'm in the process of renewing my coolant but I can't see the level in the header tank.if I dip a stick in how far up should it register for full and low

just measure the marks on the outside from the bottom of the tank, knock a tad off for the thickness of the base of the tank.

Spot on, Ady.

I think Haydn says 3/4" or 20mm on a lolly stick.

Karensmyth wrote:I'm in the process of renewing my coolant but I can't see the level in the header tank.if I dip a stick in how far up should it register for full and low

20mm when stick is vertical. Or fit a Low Coolant Alarm and let it do the measuring for you.