Bongo Fury

Hi All, I am leaking fluid from here.










Does anyone know what type of seal/gasket this requires?

Thanks,

Adam

cannot see the images.

Sorry, Hope that's a bit clearer!!

Thanks, But looking at this, I think it is o'ring no.5 I need.

http://lushprojects.com/bongopartsmk2/1R05772.gif

Anyone know the dimensions of this oring?

Many thanks, Adam

Its not pointing at an image, its pointing to Googles servers that then redirect you to an image internally however as the URL doesn't end with an image suffix the browser doesn't know how to display it.

Sorry guys, not doing well with images.

here is a link


https://drive.google.com/file/d/0B5E2Pq ... UtRGM/view

You should be able to get seals (sealing kit S10H32610A) from Mazda dealer etc.

Good Luck.

you can get a power steering additive that cleans out the pump and swells the seals, then try a gentle nip up of the bolts on the flange.

http://www.carparts4less.co.uk/cp4l/p/- ... Aq-28P8HAQ.

or this stuff.

https://www.ebay.co.uk/i/162542158141?c ... 663&crdt=0.

http://www.halfords.com/motoring/engine ... ment-325ml

ADAMD , it is not really advisable to use additives Trying to cure the leak on these particular seals, the seals need to be replaced, failure to do so can cause damage to the pump. The reservoir can fill with air and Dump the fluid.

rita wrote:You should be able to get seals (sealing kit S10H32610A) from Mazda dealer etc.

We have one set in stock, see http://bongoland.co.uk/product/power-as ... ing-seals/

Thanks Ian, is that the set 32-610 as shown in this picture?
http://lushprojects.com/bongopartsmk2/1R05772.gif
Thanks,

Adam

teenmal wrote:ADAMD , it is not really advisable to use additives Trying to cure the leak on these particular seals, the seals need to be replaced, failure to do so can cause damage to the pump. The reservoir can fill with air and Dump the fluid.

You should be able to purchase the Power Steering Pump Seals for under a tenner.