Bongo Fury

g8dhe wrote: ↑Mon Oct 05, 2020 10:01 am Nothing listed but might be worth calling Bongospares and Mazdabongo as they seem to have all the other suspension bits available ?

Alkers wrote: ↑Mon Oct 05, 2020 9:38 am Does anyone know where to source the rubber part that goes between the rear coil spring and the cup on the suspension mount? Getting a small bit of rust addressed and these rubbers are badly perished.

rita wrote: ↑Wed Mar 03, 2021 1:04 pm

Alkers wrote: ↑Mon Oct 05, 2020 9:38 am Does anyone know where to source the rubber part that goes between the rear coil spring and the cup on the suspension mount? Getting a small bit of rust addressed and these rubbers are badly perished.

try here http://www.autospares.eu/price-lists/mazda/3526/

Alkers wrote: ↑Tue Mar 02, 2021 5:55 pm I did in the end - I got two from a breakers in the UK but they were only marginally better than the ones I had already so I suspect to need to replace them in the near future.

https://www.spaccer.com/ Will make a custom mount but involves raising the van slightly at least. These are pricey too.

I've actually sourced a perfect fit shock mount from a russian vehicle, which I bought on ebay through an instagram contact - I've just asked him now if he's any more to sell and will post the link if he does. These are a perfect fit but also raise the ride height slightly. These cost me about 45e including shipping for a pair. I've not installed them yet but I have a spare set of springs to measure against an they're perfect.