Page 1 of 1

Pics inside sill repair?

Posted: Mon May 17, 2021 11:02 pm
by StubieD
Hi, been searching loads of threads but can't find any pics or info on repairing the 2mm strengthening section between inner and outer sills. Mine has evaporated from approx 1/2" from top.
Is there repair panels for these as I can only find outer and part inner sills. The full length of the sill needs repaired (passenger side) but I'm not sure exactly what this inner section should look like or if I need to replace the whole length? (I was going to weld in a section at each jacking point)
Any help would be greatly appreciated.